hi experts,

Has anyone run into the situation where the TAX Groups don't match between the BSEG and BSET tables?  If so is there a solution that someone has applied successfully.

jkb04

Hello everyone,

we have a system composed in this way:

- one DB instance + CI instance

- more AS

We are testing the daily backup using veeam.

When the backup finish there are some problem.

It seems that the servers freeze for a short period and so we receive some DUMP due to broken connectio, some error that the AS don't reah the cerntral lock handler, and there are some broken transaction (transaction SM13).

We have discovered that the problem is due to the snaphot removal and consolidation.

In fact the problem is the snapshot removal/consolidation on vmware. We have tried to do a snapshot and after that to remove it and we have the same behavior.

Do you know if is it possible to solve this problem?

We wish to do a veeam backup daily, but with this problem it is not a good choice.

Thank you in advance for your help.

Regards

Matteo Stocco

Hello All,

Reg EWA report I have few clarifications for which I am not able to find a concrete solution, so seeking some expert advise from the community.

Hardware capacity Analysis.

Not getting usage regarding the CPU Utilisation, I am getting info about the number of CPU's CPU info model etc but utilization data I am not getting.

I have checked the note 1309499 - Hardware Capacity Analysis in SAP Services.

All the criterias are fulfilled SAP OScol, SAP Host agent, ST06/OS07 I am able to see all the data.

Attached screen shots from the report

My H/w is IBM Power VM with Shared processor LPAR as per the above note, it says PUA should be enabled for my machine type, but strange thing is for the other SAP server of the same H/w specs I am getting the CPU util data in H/w capacity, so can you let me know if anybody of you have faced a similar issue and what needs to be enabled to get the CPU Util data in EWA report.

Solman version 7.1 SP 08 Managed system infor SAP NW 7.4 SP 05

OS/DB - AIX 6.1/Oracle 11.2.0.4

Also I am not getting the rating for Overal section Database server load from expensive SQL statements, whereas for the table Load from Expensive SQL stsmts I am getting the rating, it is not reflected in the overall rating.

Already checked the note  551646 and no clue related to my issue.

Also for DVM is it necessary to have ST 7.1 SP 12 or higher?

I am not able to get the data for that section too.

Let me know how the data is collected and how to troubleshoot here.

Please help.

How can I enable CCMS monitoring for Business Connecter. Im using 4.7.

/Teddy.

Hello all,

I want to start the WebDispacher ( NW 7.0 EhP3, Java system)

The Error is:

3> startsap all X01

Trying to start SID database ...

Log file: /home/sidadm/startdb.log

Starting Startup Agent sapstartsrv

OK

Instance Service on host sid started

-------------------------------------------

starting SAP Instance X01

Startup-Log is written to /home/sidadm/startsap_X01.log

-------------------------------------------

/usr/sap/SID/SYS/exe/run/sapcontrol -prot NI_HTTP -nr 01 -function Start

startup of Instance failed

See /home/sidadm/startsap_X01.log for details

<sid>dm 74> ./sapcontrol -prot NI_HTTP -nr 01 -function Stop

08.04.2015 06:02:58

Stop

FAIL: HTTP error, HTTP/1.1 401 Unauthorized

/usr/sap/<SID>/SYS/exe/run/sapcontrol -prot NI_HTTP -nr 01 -function Start

08.04.2015 05:32:52

Start

FAIL: HTTP error, HTTP/1.1 401 Unauthorized

-------------------------------------------

05:33:02

startup of Instance failed

What I tried and didnt work: stop sap instance, kill web dispacher process.

The webdispacher profile looks like this:

SAPSYSTEMNAME = sapsid

SAPSYSTEM = 01

# Message Server Description

rdisp/mshost=hostname

#ms_http_port=3900

ms/http_port  = 3900

# SAP Web Dispatcher Parameters

wdisp/auto_refresh  = 120

wdisp/max_servers  = 100

# Directory variables

DIR_EXECUTABLE = $(DIR_INSTANCE)/exe

DIR_INSTANCE = /usr/sap/SID/SCS00/work

# Description of the Access Points

#icm/server_port_0 = PROT=HTTP , PORT=8$ (SAPSYSTEM) 00, TIMEOUT=60 , PROCTIMEOUT=600

icm/server_port_0  = PROT=HTTP,PORT=80

icm/server_port_1  = PROT=ROUTER,PORT=443

# Description of the Resources

icm/min_threads  = 20

icm/max_threads  = 40

icm/max_conn  = 500

# Communication Buffer

mpi/total_size_MB  = 100

mpi/buffer_size  = 65536

# Parameters for the HTTPS Routing

wdisp/HTTPS/dest_logon_group  = HTTPS

wdisp/HTTPS/max_client_ip_entries   = 100000

wdisp/HTTPS/sticky_mask             = 255.255.255.0

Can you pls advise me.

Thx

Chris

Short text

    Process terminated by signal 11.

What happened?

    Error in the SAP kernel.

    The current ABAP "SAPLSVSM" program had to be terminated because the

    ABAP processor detected an internal system error.

Error analysis

    An R/3 System process was terminated by an operating system signal.

    -

    Possible reasons for this are:

    1. Internal system error.

    2. Process was terminated externally (by the system administrator).

       -

    Last error logged in SAP kernel

    Component............ "NI (network interface)"

    Place................ "SAP-Dispatche****** on host ****"

    Version.............. 40

    Error code........... "-6"

    Error text........... "connection to partner '127.0.0.1:0' broken"

    Description.......... "NiIRead: 127.0.0.1:0"

    System call.......... "recv"

    Module............... "nixxi.cpp"

    Line................. 4849

    The error reported by the operating system is:

    Error number..... " "

    Error text....... " "

System environment

    SAP-Release " "

    Application server... "*****"

    Network address...... "*****"

    Operating system..... "Linux"

    Release.............. "3.0.101-0.46-default"

    Hardware type........ "x86_64"

    Character length.... 16 Bits

    Pointer length....... 64 Bits

    Work process number.. 31

    Shortdump setting.... "full"

    Database server... "******"

    Database type..... "DB6"

    Database name..... "PEC"

    Database user ID.. "SAPSR3"

    Terminal.......... "*****"

    Char.set.... "C"

    SAP kernel....... 721

    created (date)... "Dec 4 2013 12:39:33"

    create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr131018"

    Database version. "DB6_81 "

    Patch level. 201

    Patch text.. " "

    Database............. "DB6 09.07.*, DB6 09.08.*, DB6 10.*"

    SAP database version. 721

    Operating system..... "Linux 2.6, Linux 3"

    Memory consumption

    Roll.... 0

    EM...... 20949000

    Heap.... 0

    Page.... 1163264

    MM Used. 4755120

    MM Free. 3621632

Information on where terminated

    Termination occurred in the ABAP program "SAPLSVSM" - in

     "VRM_QUEUE_FLUSH_SIGNATURE".

    The main program was "SAPMV45A ".

    In the source code you have the termination point in line 65

    of the (Include) program "LSVSMU07".

Error occurred during batch input processing

Active Calls in SAP Kernel

Lines of C Stack in Kernel (Structure Differs on Each Platform)

(LinStack+0x33)[0x5ec752]

(CTrcStack2+0x48)[0x5ece5c]

(_ZL16rabax_CStackSavev+0xc6)[0x76c81f]

(ab_rabax+0x27ea)[0x772c58]

(ab_CoreInfo+0xc6)[0x775860]

(ThrCoreInfo+0x9)[0x5a75a6]

(ThIErrHandle+0xf3f)[0x4a05b9]

(ThSigHandler+0xdb)[0x4dc16a]

(SigIGenAction+0x2da)[0x1422b8a]

/lib64/libpthread.so.0[0x7f0b8e636850]

(_ZL20ScanBaseRefsCallbackP8BaseAttaP10AB_DATASEGjjtjPKv+0x3c)[0x18d61dc]

(_Z11ab_ScanBasePFvP8BaseAttaP10AB_DATASEGjjtjPKvES4_+0xc8)[0x1776928]

(_ZL19gcInitializeRootSet8GC_MODUSP19SzkAlgTraverseGraph+0xcd)[0x18d8cbd]

(ab_ObjMgrPerformGCStep__+0x3a3)[0x18c0e43]

(_Z8ab_jloopv+0x663)[0x19569f3]

(_Z8ab_extriv+0x59e)[0x1758a9e]

(_Z9ab_xeventPKDs+0x23)[0x179b873]

(ab_dstep+0xfa)[0x17b945a]

(dynpctlcal+0x29a)[0x1642cba]

(dynpout0+0xe8)[0x166eac8]

(dynprctl+0x135)[0x1643ef5]

(dynpen00+0x7a8)[0x1638128]

(ThSoftCancel+0xbeb)[0x505e50]

(ThCleanPrevUser+0x529)[0x4a3311]

(ThCheckPrevUser+0x1d7)[0x4a39cc]

(TskhLoop+0x4df3)[0x15b5f13]

(ThStart+0x25e)[0x4aaa29]

(DpMain+0x395)[0x1566945]

/lib64/libc.so.6(__libc_start_main+0xe6)[0x7f0b8e2ccc36]

Internal notes

    The termination was triggered in function "ab_CoreInfo"

    of the SAP kernel, in line 8945 of the module

     "//bas/721_REL/src/krn/runt/abrabax.c#9".

    The internal operation just processed is "CALY".

    Internal mode was started at 20150331132215.

    Stack trace of 'core'.

Hello All,

I am creating this post after doing lot of analysis and troubleshooting, so I would be really glad if someone could help me share their experience if they did face the same issue.

I have set up CCMS alert for my SAP ERP Server NW 740 by connecting it to Solman 7.1. As both my CEN and SAT have releases beyond 7.0 EhP1 and 7.0 Ehp2, I believe only adding an entry on the CEN using create remote monitoring system entry would do.

I did that and the test results are successful, both RFC and Agent for remote systems shows OK and successful.

But the issue is auto-reaction method runtime status shows as RUN_REQUIRED which means it is waiting for sap cen sys method dispatcher to process the job, the job is running just fine in the solman/000.

However if I try to Start the auto-reaction method manually it just works fine.

Notes which I have gone thru with no help.

1636899 - Setting up CCMS Auto-Reactions, and Analysing Issues

939616 - CCMS auto-reactions: Help with troubleshooting

And also I have one doubt as this CCMS uses host agent I believe there is no need for registering the CCMS agent from SAT to CEN at the OS level?

My remote agent Availability shows 0% in rz20 whereas agent for remote system shows ONLINE in rz21.

Please help...

Hello all,

I'm using SAP Web Dispatcher 7.42 SP 110 for NWBC load balancing.

Configured wdisp/ssl_encrypt=0 and in ERP system HTTPURLLOC pointing to the Web Dispatcher.

It is working as expected but with one big drawback: In sm04/al08 all connections now have the Web Dispatcher IP as 'Terminal'. And even in 'Technical Information' the gui host is empty.

Is there any chance to get these information (IP of the Gui) forwarded into the ERP system? It would be quite complicate to look up these information from Web Dispatcher Administration.

Kind regards,

Alexander

Hi Gurus,

To optimize over all migration time, I am planning to use table splitting using SWPM & parallel export/import using MIGMON.

thing is that I have never used these two options together before.

Can someone who has worked in such scenario provide some details on steps I can follow?

I have few questions around it:

Any special care needs to be taken while using table splitting & parallel export/import together?

how is the data consistency will be handled while import?

table splitting will split the tables in different STR files which will be unloaded parallely, however as soon as a package is exported .SGN file will signal that package for import, if that package is from splitted table, how does it will integrate all the packages for that splitted tables during import?

do we need to worry about it or MIGMON is smart enough to handle it by itself?

source - AIX/DB2 target - linux/DB2.

Best Regards

SB

Hello Folks - often I run into situations (especially when BW is involved) where various users like ALEREMOTE or similar users are getting locked due to too many incorrect logon attempts.  If I know from where (could be within the system or some external SAP system) it is that is calling into this system w/ the wrong pwd, I can fix it.  But it gets tricky when I don't.  I know to scour ST22/SM21 to look for clues but do not think those will give information on which (external) system for sure is calling in and locking the user.

I am aware ST01 gives you opportunity to turn on a trace but not sure that is the best way to solve these situations.  Appreciate any tips you can share.  Thanks

Dear

we have requirement to restart the server so we restart whole server and when we try to start all things are started but web dispather not getting started

I will send you the screen we are on aix 6.1

Kindly suggest where i am going wrong

Regards

Rajendra

Environment: HP -UX Oracle 11g

I performed a system restore on PI dual stack system using backup restore method

I created the control file from source system DB is up and running listener is up and running as well but the SAP application is not able to make connection with the DB

I am attaching the Trans.log file and the result of startsap command on console:

Help is appreciated-

------------------------------

startsap

Checking <SID> Database

Database is not available via R3trans

-------------------------------------------

Trying to start <SID> database ...

Log file: /home/<SID>adm/startdb.log

Starting Startup Agent sapstartsrv

OK

Instance Service on host <hostname> started

-------------------------------------------

starting SAP Instance SCS12

Startup-Log is written to /home/<SID>adm/startsap_SCS12.log

-------------------------------------------

/usr/sap/<SID>/SCS12/exe/sapcontrol -prot NI_HTTP -nr 12 -function Start

Instance on host <hostname> started

Starting Startup Agent sapstartsrv

OK

Instance Service on host <hostname> started

-------------------------------------------

starting SAP Instance ASCS11

Startup-Log is written to /home/<SID>adm/startsap_ASCS11.log

-------------------------------------------

/usr/sap/<SID>/ASCS11/exe/sapcontrol -prot NI_HTTP -nr 11 -function Start

Instance on host <hostname> started

Starting Startup Agent sapstartsrv

OK

Instance Service on host <hostname> started

-------------------------------------------

starting SAP Instance DVEBMGS10

Startup-Log is written to /home/<SID>adm/startsap_DVEBMGS10.log

-------------------------------------------

/usr/sap/<SID>/DVEBMGS10/exe/sapcontrol -prot NI_HTTP -nr 10 -function Start

Instance on host <hostname> started

---------------------------------

<hostname>:<SID>adm 28> R3trans -d

This is R3trans version 6.24 (release 721 - 26.09.13 - 20:13:07 ).

unicode enabled version

2EETW169 no connect possible: "DBMS = ORACLE                          --- dbs_ora_tnsname = '<SID>'"

R3trans finished (0012).

--------------------------------

After reviewing trans.log do I have to do SSFS configuration

---------------------------------

Regards,

APS

Hi,

We are required to perform a SAP hardware migration and upgrade oracle database to 11g.

Current environment is a distributed installation with CI and DB on seperate hosts. Both host have the same OS version.

Our landscape consist of ECC 6.0 / PI 7.0 / BW 7.0/ SOLMAN 7.1 . All these instance are on seperate hosts.

Current environemnt:

OS - RHEL 5.4

DB - Oracle 10.2.0.4

DB Hardware - Sun Blade X6240

CI (Application server hardware) - Sun Blade X6240

Desired target environment:

OS - RHEL 5.4

DB - Oracle 11.2.0.3

DB Hardware - HP (model N/A)

CI (Application server hardware) - V-Block (Virtual environment)

I am thinking of the following approach :

1. Homogeneous system copy with DB restore method to setup the target system

2. Upgrade Oracle to 11.2.0.3

3. Setup oracle log shipping from the current producitve environemnt to the newly created target system until cutover.

4. During cutover change the IP and hostname of the newly created target to that of the current production application server.

Is this a good approach  ?

Or is there a better way to achieve this ?

Thanks

LM

Message was edited by: L M

Hello all,

Do you know what Kernel to use for WeDispatcher 720?

thx

Chris

F  [Thr 140737354041184] *** LOG => connected to Enqueue Server.

F  [Thr 140737354041184] *** LOG => connected to Message Server.

F  [Thr 140737354041184] *** LOG => Starting run level 1.

F  ********************************************************************************

F  Java process [deployment] properties:

F    section name     : deployment

F    config file      : /usr/sap/HPD/J00/exe/startup.properties

F    node name        : Deploy_offline

F    home directory   : /usr/sap/HPD/J00/j2ee/cluster

F    shutdown timeout : 136000 ms

F    exit timeout     : 7000 ms

F    debuggable       : false

F    debugger active  : false

F  ********************************************************************************

F  [Thr 140737354041184] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).

F  [Thr 140737354041184] *** LOG => Starting nodes: runlevel 1.

F  ********************************************************************************

F  Starting process: /usr/sap/HPD/J00/exe/jstart

F    arg[ 1] = -nodeId=0

F    arg[ 2] = pf=/usr/sap/HPD/SYS/profile/HPD_J00_accsdevep1

F    arg[ 3] = -hostvm

F    arg[ 4] = -nodeName=deployment

F    arg[ 5] = -file=/usr/sap/HPD/J00/exe/startup.properties

F    arg[ 6] = -jvmFile=/usr/sap/HPD/J00/work/jstart.jvm

F    arg[ 7] = -traceFile=/usr/sap/HPD/J00/work/dev_deployment

F    arg[ 8] = -javaOutFile=/usr/sap/HPD/J00/work/jvm_deployment.out

F  exePath : PATH=/usr/sap/HPD/J00/exe/sapjvm_6/bin:/usr/sap/HPD/J00/exe:/sybase/HPD/ASE-15_0/jobscheduler/bin:/sybase/HPD/ASE-15_0/bin:/sybase/HPD/ASE-15_0/install:/sybase/HPD/OCS-15_0/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/sap/HPD/SYS/exe/uc/linuxx86_64:/usr/sap/HPD/SYS/exe/run:/home:.

F  libPath : LD_LIBRARY_PATH=/usr/sap/HPD/J00/exe/sapjvm_6/jre/lib/amd64/server:/usr/sap/HPD/J00/exe/sapjvm_6/jre/lib/amd64:/usr/sap/HPD/J00/j2ee/os_libs:/usr/sap/HPD/J00/exe:/usr/sap/HPD/SYS/global/syb/linuxx86_64/sybodbc:/sybase/HPD/ASE-15_0/lib:/sybase/HPD/OCS-15_0/lib:/sybase/HPD/OCS-15_0/lib3p64:/sybase/HPD/OCS-15_0/lib3p:/usr/sap/HPD/SYS/exe/run:/usr/sap/HPD/SYS/exe/uc/linuxx86_64

F  stdout  : /usr/sap/HPD/J00/work/std_deployment.out

F  stderr  : /usr/sap/HPD/J00/work/std_deployment.out

F  console : no

F  debugger: no

F  nice    : no

F  ********************************************************************************

F  Process Deploy_offline started with pid 1885

F  ********************************************************************************

F  [Thr 140737354041184] *** LOG => Process deployment started (pid 1885).

F 

F [Thr 140737354041184] Tue Apr  7 17:51:47 2015

F  [Thr 140737354041184] *** LOG => Process deployment stopping (pid 1885).

F  [Thr 140737354041184] *** LOG => Signal 17 SIGCHLD.

F  [Thr 140737354041184] *** LOG => Process deployment stopped (pid 1885).

F  [Thr 140737354041184] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).

F  [Thr 140737354041184] *** LOG => Run level 1 completed.

F  [Thr 140737354041184] *** LOG => Starting run level 2.

F  ********************************************************************************

F  Java process [bootstrap] properties:

F    section name     : bootstrap

F    config file      : /usr/sap/HPD/J00/exe/startup.properties

F    node name        : Instance_bootstrap

F    home directory   : /usr/sap/HPD/J00/j2ee/cluster

F    shutdown timeout : 136000 ms

F    exit timeout     : 7000 ms

F    debuggable       : false

F    debugger active  : false

F  ********************************************************************************

F  [Thr 140737354041184] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).

F  [Thr 140737354041184] *** LOG => Starting nodes: runlevel 2.

F  ********************************************************************************

F  Starting process: /usr/sap/HPD/J00/exe/jstart

F    arg[ 1] = -nodeId=0

F    arg[ 2] = pf=/usr/sap/HPD/SYS/profile/HPD_J00_accsdevep1

F    arg[ 3] = -hostvm

F    arg[ 4] = -nodeName=bootstrap

F    arg[ 5] = -file=/usr/sap/HPD/J00/exe/startup.properties

F    arg[ 6] = -jvmFile=/usr/sap/HPD/J00/work/jstart.jvm

F    arg[ 7] = -traceFile=/usr/sap/HPD/J00/work/dev_bootstrap

F    arg[ 8] = -javaOutFile=/usr/sap/HPD/J00/work/jvm_bootstrap.out

F  exePath : PATH=/usr/sap/HPD/J00/exe/sapjvm_6/bin:/usr/sap/HPD/J00/exe:/sybase/HPD/ASE-15_0/jobscheduler/bin:/sybase/HPD/ASE-15_0/bin:/sybase/HPD/ASE-15_0/install:/sybase/HPD/OCS-15_0/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/sap/HPD/SYS/exe/uc/linuxx86_64:/usr/sap/HPD/SYS/exe/run:/home:.

F  libPath : LD_LIBRARY_PATH=/usr/sap/HPD/J00/exe/sapjvm_6/jre/lib/amd64/server:/usr/sap/HPD/J00/exe/sapjvm_6/jre/lib/amd64:/usr/sap/HPD/J00/j2ee/os_libs:/usr/sap/HPD/J00/exe:/usr/sap/HPD/SYS/global/syb/linuxx86_64/sybodbc:/sybase/HPD/ASE-15_0/lib:/sybase/HPD/OCS-15_0/lib:/sybase/HPD/OCS-15_0/lib3p64:/sybase/HPD/OCS-15_0/lib3p:/usr/sap/HPD/SYS/exe/run:/usr/sap/HPD/SYS/exe/uc/linuxx86_64

F  stdout  : /usr/sap/HPD/J00/work/std_bootstrap.out

F  stderr  : /usr/sap/HPD/J00/work/std_bootstrap.out

F  console : no

F  debugger: no

F  nice    : no

F  ********************************************************************************

F  Process Instance_bootstrap started with pid 1923

F  ********************************************************************************

F  [Thr 140737354041184] *** LOG => Process bootstrap started (pid 1923).

F 

F [Thr 140737354041184] Tue Apr  7 17:51:53 2015

F  [Thr 140737354041184] *** LOG => Process bootstrap running (pid 1923).

F  [Thr 140737354041184] *** LOG => Instance state is "Synchronizing binaries" (RUNNING @ 0, INACTIVE).

F 

F [Thr 140737354041184] Tue Apr  7 17:51:54 2015

F  [Thr 140737354041184] *** LOG => Process bootstrap stopping (pid 1923).

F 

F [Thr 140737354041184] Tue Apr  7 17:51:55 2015

F  [Thr 140737354041184] *** LOG => Signal 17 SIGCHLD.

F  [Thr 140737354041184] *** LOG => Process bootstrap stopped (pid 1923).

F  [Thr 140737354041184] *** WARNING => Node bootstrap failed: result 1, exit code 538. [sfxxnode.hpp 1024]

F  *******************************************************************F  ********************************************************************************

F  Starting process: /usr/sap/HPD/J00/exe/sapcontrol

F    arg[ 1] = -prot

F    arg[ 2] = PIPE

F    arg[ 3] = -nr

F    arg[ 4] = 00

F    arg[ 5] = -function

F    arg[ 6] = CreateSnapshot

F    arg[ 7] = Servercrash

F    arg[ 8] = postmortem?node=bootstrap&exitcode=538

F    arg[ 9] = 1

F    arg[10] = 10000

F    arg[11] = ""

F    arg[12] = ""

F    arg[13] = DEFAULT

F  exePath : PATH=/usr/sap/HPD/J00/exe:/sybase/HPD/ASE-15_0/jobscheduler/bin:/sybase/HPD/ASE-15_0/bin:/sybase/HPD/ASE-15_0/install:/sybase/HPD/OCS-15_0/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/sap/HPD/SYS/exe/uc/linuxx86_64:/usr/sap/HPD/SYS/exe/run:/home:.

F  libPath : LD_LIBRARY_PATH=/usr/sap/HPD/J00/exe:/usr/sap/HPD/SYS/global/syb/linuxx86_64/sybodbc:/sybase/HPD/ASE-15_0/lib:/sybase/HPD/OCS-15_0/lib:/sybase/HPD/OCS-15_0/lib3p64:/sybase/HPD/OCS-15_0/lib3p:/usr/sap/HPD/SYS/exe/run:/usr/sap/HPD/SYS/exe/uc/linuxx86_64

F  stdout  : /usr/sap/HPD/J00/work/std_snapshot.out

F  stderr  : /usr/sap/HPD/J00/work/std_snapshot.out

F  console : no

F  debugger: no

F  nice    : no

F  ********************************************************************************

F  Process snapshot started with pid 2785

F  ********************************************************************************

F  [Thr 140737354041184] *** LOG => Process snapshot started (pid 2785).

F  [Thr 140737354041184] *** LOG => Process snapshot running (pid 2785).

F 

F [Thr 140737354041184] Tue Apr  7 17:51:58 2015

F  [Thr 140737354041184] *** LOG => Signal 17 SIGCHLD.

F  [Thr 140737354041184] *** LOG => Process snapshot stopped (pid 2785).

F  [Thr 140737354041184] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).

F  [Thr 140737354041184] *** LOG => Run level 2 completed.

F  [Thr 140737354041184] *** LOG => Instance state is "Some processes failed" (STOPPED @ 0, INACTIVE).

I  [Thr 140737354041184] MPI: dynamic quotas disabled.

I  [Thr 140737354041184] MPI init: pipes=4000 bu

Dear Experts

          i have configured ADS,SSO,SLD on Portal but i have not able to login to Portal with Standard user J2EE_ADM_SID i have not created any other user in that we are working on EP 7.3

Kindly give me some suggestions

Regards

Hi

Sometimes our system takes a lot of strain from users running long CPU intensive jobs. How does one find out what is the acceptable response time for your Production system e.g. what transaction can I run to check it and how can you determine the response time at peak times for instance to compare it to your baseline/acceptable response time?

Thanks, Adrian

Hi experts,

Im having problem installing .SCA files onto our system. The components kept being rejected 004/005, see image attached.

KIndly assist. thanks

R,

AM

Hi Gurus,

We are currently on SAP Netweaver Portal 7.31, and we have Security Audit Log as per Security Audit Log of the AS Java - System Security - SAP Library

However when we go into the Java Log Viewer http://<host>:<port>/nwa/logs we cannot display the Security Audit Log (security_audit*).

Is there additional configuration to allow Java Log Viewer to display Security Audit Log of AS-JAVA?

Thanks in advance.

Hello all,

can you help me with this:

http://<web_dispatcher_host>:<web_dispatcher_port>/sap/admin  >> works but does not show anything at Monitor Server Group ( should I check some paramater somewhere?)

http://<web_dispatcher_host><web_dispatcher_port>>> does not work:

500 Dispatching Error

--------------------------------------------------------------------------------

Error: -26

Version: 7200

Component: HTTP_ROUTE

Date/Time: Fri Apr 09 08:16:52 2015 

Module: http_route_mt.c

Line: 3360

Server: hostname_SID_02

Error Tag: {00010055}

Detail: no valid destination server available for '!ALL' rc=13

Thx

Chris