Hellow!

I need report  including following  columns:

1. Transaction

2. User name

3. Run count

I have found this information in st03 transaction but instead of "run count" it shows "step count" and it is useless for me.

Any advice ?

Andrey Garshin.

Hi Gurus,

We are currently on SAP Netweaver Portal 7.31, and we have Security Audit Log as per Security Audit Log of the AS Java - System Security - SAP Library

However when we go into the Java Log Viewer http://<host>:<port>/nwa/logs we cannot display the Security Audit Log (security_audit*).

Is there additional configuration to allow Java Log Viewer to display Security Audit Log of AS-JAVA?

Thanks in advance.

Dear Experts

we are implementing SAP HR for that we need some addon need to install

in our system for ESS activity. which is ADD-on  EA-HR_MSS10.SAR and update

that to sp level 8 I have download EA-HR_MSS10.SAR and uncar it

in /USR/SAP/TRANS which goes to /USR/SAP/TRANS/EPS/in as uncar file

which is EPS/in/CSN0120061532_0088955.PAT but while login to system

with 000 ddic and run tcode SAINT and try to add that add on as install

package from front end server it does not show the file I am sending

you the screen shot for the same for ready reference

when I press continue no new shown in ADDON and I am not able to

implent the same once I install this then I have to install sp 8 also

for now I have get rid of this . tell again I have to download the

thing or I need delete some files to get that file into ADD ON screen

if i any kind mistake let me know

Kindly let me know at earliest our all functional consultant waiting

Regards

Gurus -

I have finally managed to install the trail version of SAP 7.0 in my home PC running on XP Home

I am only able to access the system from my home network.  When I am outside of the network am not able to access it.  I think I have to configure some port forwarding stuff in my home wireless router.

Any pointers?

Regards

Sudhakar

hello,

is there a possibility to determine the netweaver version oder the cmd? via RFC? or can i find this information in a logfile?

kind regards,

Tobias

When submitting web forms in Fiori applications, we are getting the error:

No default virus profile active or found. Please check the official guide.

In our SAP Gateway system, SAP transaction VSCANPROFILE, I can see that the parameter /SCET/DP_VS_ENABLED does not have any checkboxes checked.

Within the transaction VSCANPROFILE, I get the warning:

/SCET/DP_VS_ENABLED Profile parameters exist, but evaluation has not been activated

I am not sure if the warning is relevant to the error I am seeing.

Please can you suggest why I am getting the error and if necessary, how to resolve the warning?

Hi Guys,

Can you please help, we are trying to setup offline workflow approvals and as such required inbound mail server to be configured as emails will be sent to SAP. Our idea is to send an email to a manager, the email will have approve or rereject link. The manager will select the correct link and reply to the email. Therefore we need out systems to be configured to recive email

The question how can i check if this has already been configured?

Thank you

Andy

Hi All,

  I saw there are several old posts discuss about setting up the notification for the expiring certs ( e.g. those certs on the Netweaver's TicketKeyStore ) but there is no standard solution / feature yet.

  Anyone have idea about this ? Or is this feature available in newer PI version ( newer NW version ... ? )

  Thanks.

Best Regards,

Ken Kwan

Hi,

this is the error during my netweaver 7.3 installation

what does this mean ?

anybody could help me ?

Hello Guys,

We are installing NW 7.4 SR2 Enterprise Portal with sybase database on windows 2012 R2 server under high availability i.e Microsoft Cluster.

JEP is the system ID of the server, SAPJEP is the virtual host and X.X.X.36 is the virtual I.P for Central Instance node.

Physical I.P of First node is X.X.X.21

We have started the installation as first cluster node and get stuck at phase 3.

The error in sapinst.log is below:-

FCO-00011 The step assignNetworknameToClusterGroup with step key

|NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|assignNetworknameToClusterGroup

was executed with status ERROR ( Last error reported by the step: Could

not set properties on ClusterResource 'SAP JEP IP'.).

The error log of sapinst_dev.log is is below:-

TRACE      2015-03-18 11:30:29.193

NWInstance.getStartProfilePath(true)

TRACE      2015-03-18 11:30:29.194

NWInstance.getStartProfileName()

TRACE      2015-03-18 11:30:29.194

NWInstance.getStartProfileName() done: JEP_ERS10_SAPJEP

TRACE      2015-03-18 11:30:29.194

NWERSInstance.getDirProfile()

TRACE      2015-03-18 11:30:29.194

NW.getDirProfile(false)

TRACE      2015-03-18 11:30:29.195

NW.getDirProfile() done: \\SAPJEP/sapmnt/JEP/SYS/profile

TRACE      2015-03-18 11:30:29.204 [synxcpath.cpp:925]

          CSyPath::getOSNodeType(bool) lib=syslib module=syslib

Path \\SAPJEP/sapmnt/JEP/SYS/profile is on a non-existing share.

TRACE      2015-03-18 11:30:29.204

NWERSInstance.getDirProfile() done: \\SAPJEP/sapmnt/JEP/SYS/profile

TRACE      2015-03-18 11:30:29.205

NWInstance.getStartProfilePath() done: \\SAPJEP/sapmnt/JEP/SYS/profile/JEP_ERS10_SAPJEP

TRACE      2015-03-18 11:30:29.206

NWInstance.getProfilePath() done: \\SAPJEP/sapmnt/JEP/SYS/profile/JEP_ERS10_SAPJEP

TRACE      2015-03-18 11:30:29.206

NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile()

TRACE      2015-03-18 11:30:29.207

NW.getPersistentDefaultProfile()

TRACE      2015-03-18 11:30:29.207

NW.isUnicode(true)

TRACE      2015-03-18 11:30:29.208

NW.isUnicode() done: true

TRACE      2015-03-18 11:30:29.208

NW.getPersistentDefaultProfile() done

TRACE      2015-03-18 11:30:29.208

NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile() done

TRACE      2015-03-18 11:30:29.208

NWProfiles(JEP.ERS10.SAPJEP)._getPersistentProfile(INSTANCE) done

TRACE      2015-03-18 11:30:29.209

NWProfiles(JEP.ERS10.SAPJEP).getPersistentProfile() done

TRACE      2015-03-18 11:30:29.209

PersistentR3Profile.commit()

TRACE      2015-03-18 11:30:29.209

PersistentR3Profile.commit() done

TRACE      2015-03-18 11:30:29.209

NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile()

TRACE      2015-03-18 11:30:29.210

NW.getPersistentDefaultProfile()

TRACE      2015-03-18 11:30:29.210

NW.isUnicode(true)

TRACE      2015-03-18 11:30:29.211

NW.isUnicode() done: true

TRACE      2015-03-18 11:30:29.211

NW.getPersistentDefaultProfile() done

TRACE      2015-03-18 11:30:29.211

NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile() done

TRACE      2015-03-18 11:30:29.211

PersistentR3Profile.commit()

TRACE      2015-03-18 11:30:29.211

PersistentR3Profile.commit() done

TRACE      2015-03-18 11:30:29.212

NWProfiles(JEP.ERS10.SAPJEP).commit() done

TRACE      2015-03-18 11:30:29.212

NWInstanceInstall.addSAPCryptoParametersToProfile() done

TRACE      2015-03-18 11:30:29.260

The step setProfilesForSAPCrypto with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0|NW_SAPCrypto|ind|ind|ind|ind|crypto|0 has been executed successfully.

INFO      2015-03-18 11:30:29.262 [synxccuren.cpp:887]

          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)

          lib=syslib module=syslib

Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.

TRACE      2015-03-18 11:30:29.265 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:29.267 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml

TRACE      2015-03-18 11:30:29.270 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:29.280 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:29.281 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml

TRACE      2015-03-18 11:30:29.284 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:29.293 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:29.295 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml

TRACE      2015-03-18 11:30:29.315 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

INFO      2015-03-18 11:30:29.330 [csistepexecute.cpp:1024]

Execute step askUnpack of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0

TRACE      2015-03-18 11:30:29.339 [csistepexecute.cpp:1079]

Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0|askUnpack returns TRUE

TRACE      2015-03-18 11:30:29.364

  Call block: NW_Unpack2_ind_ind_ind_ind

    function: NW_Unpack2_ind_ind_ind_ind_DialogPhase_askUnpack

is validator: false

TRACE      2015-03-18 11:30:29.364

NWInstall.getSystem(JEP)

TRACE      2015-03-18 11:30:29.366

NWOption(localExeDir).value()

TRACE      2015-03-18 11:30:29.366

NWOption(localExeDir).value() done: true

TRACE      2015-03-18 11:30:29.367

NWOption(collected).value()

TRACE      2015-03-18 11:30:29.367

NWOption(collected).value() done: true

TRACE      2015-03-18 11:30:29.369

NWInstall({

  sid:JEP

  sapDrive:E:

  dbtype:ind

  sapmnt:/sapmnt

  hasABAP:false

  hasJava:true

  isAddinInstallation:undefined

  unicode:true

  workplace:undefined

  loadType:SAP

  umeConfiguration:

  doMigMonConfig:

  useParallelAbapSystemCopy:

  dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile

  os4_krnlib:

  os4_seclanglib:

  useCurrentUser:false

  noShares:false

})

TRACE      2015-03-18 11:30:29.370

NW({

  sid:JEP

  sapDrive:E:

  dbtype:ind

  sapmnt:/sapmnt

  hasABAP:false

  hasJava:true

  isAddinInstallation:undefined

  unicode:true

  workplace:undefined

  loadType:SAP

  umeConfiguration:

  doMigMonConfig:

  useParallelAbapSystemCopy:

  dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile

  os4_krnlib:

  os4_seclanglib:

  useCurrentUser:false

  noShares:false

})

TRACE      2015-03-18 11:30:29.371

NW() done

TRACE      2015-03-18 11:30:29.371

NWInstall() done

TRACE      2015-03-18 11:30:29.371

NWInstall.getSystem() done

TRACE      2015-03-18 11:30:29.372

NWInstall.mapUnpackTable(t_askUnpack)

TRACE      2015-03-18 11:30:29.373

NWInstall.mapUnpackTable() done: true

TRACE      2015-03-18 11:30:29.377

NWDB._get(JEP, ind)

TRACE      2015-03-18 11:30:29.377

NWDB._fromTable(JEP, ctor)

TRACE      2015-03-18 11:30:29.379

NWDB(JEP, {

  sid:JEP

  hostname:undefined

  dbsid:undefined

  installDB:false

  ORACLE_HOME:

  abapSchema:

  abapSchemaUpdate:

  javaSchema:

})

TRACE      2015-03-18 11:30:29.379

NWDB() done

TRACE      2015-03-18 11:30:29.379

NWDB._fromTable() done

TRACE      2015-03-18 11:30:29.380

NWDB._get() done

TRACE      2015-03-18 11:30:29.380

NWDB.getDBType(): ind

TRACE      2015-03-18 11:30:29.390 [iaxxgenimp.cpp:283]

          CGuiEngineImp::showDialogCalledByJs()

showing dlg d_nw_ask_unpack

TRACE      2015-03-18 11:30:29.390 [iaxxgenimp.cpp:293]

          CGuiEngineImp::showDialogCalledByJs()

<dialog sid="d_nw_ask_unpack">

<title>Unpack Archives</title>

<table enabled="true" fixedrows="true" sid="askUnpack">

<caption>Archives to Be Unpacked</caption>

<column enabled="true" type="check" numeric="false" upper="false" name="unpack">

  <caption>Unpack</caption>

  <helpitem id="common.Unpack"/>

  <value type="string">false</value>

</column>

<column enabled="false" type="field" numeric="false" upper="false" name="path">

  <caption>Archive</caption>

  <helpitem id="common.UnpackArchive"/>

</column>

<column enabled="false" type="field" numeric="false" upper="false" name="codepage">

  <caption>Codepage</caption>

  <helpitem id="common.UnpackArchiveCodepage"/>

</column>

<column enabled="false" type="field" numeric="false" upper="false" name="destination">

  <caption>Destination</caption>

  <helpitem id="common.UnpackArchiveDestination"/>

</column>

<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">

  <caption>Downloaded To</caption>

  <helpitem id="common.UnpackArchiveDownload"/>

  <value type="string"/>

</column>

<row rowId="0">

  <boolvalue>

  <true/>

  </boolvalue>

  <value>DBINDEP\SAPEXE.SAR</value>

  <value>Unicode</value>

  <value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>

  <value></value>

</row>

</table>

<dialog/>

TRACE      2015-03-18 11:30:29.391 [iaxxgenimp.cpp:1031]

          CGuiEngineImp::acceptAnswerForBlockingRequest

Waiting for an answer from GUI

TRACE      2015-03-18 11:30:30.617 [iaxxdlghnd.cpp:96]

          CDialogHandler::doHandleDoc()

CDialogHandler: ACTION_NEXT requested

TRACE      2015-03-18 11:30:30.618 [iaxxcdialogdoc.cpp:190]

          CDialogDocument::submit()

<dialog sid="d_nw_ask_unpack">

<table enabled="true" fixedrows="true" sid="askUnpack">

<caption>Archives to Be Unpacked</caption>

<column enabled="true" type="check" numeric="false" upper="false" name="unpack">

  <caption>Unpack</caption>

  <helpitem id="common.Unpack"/>

  <value type="string">false</value>

</column>

<column enabled="false" type="field" numeric="false" upper="false" name="path">

  <caption>Archive</caption>

  <helpitem id="common.UnpackArchive"/>

</column>

<column enabled="false" type="field" numeric="false" upper="false" name="codepage">

  <caption>Codepage</caption>

  <helpitem id="common.UnpackArchiveCodepage"/>

</column>

<column enabled="false" type="field" numeric="false" upper="false" name="destination">

  <caption>Destination</caption>

  <helpitem id="common.UnpackArchiveDestination"/>

</column>

<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">

  <caption>Downloaded To</caption>

  <helpitem id="common.UnpackArchiveDownload"/>

  <value type="string"/>

</column>

<row rowId="0">

  <boolvalue>

  <true/>

  </boolvalue>

  <value>DBINDEP\SAPEXE.SAR</value>

  <value>Unicode</value>

  <value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>

  <value/>

</row>

</table>

<dialog/>

TRACE      2015-03-18 11:30:30.646

  Call block: NW_Unpack2_ind_ind_ind_ind

    function: NW_Unpack2_ind_ind_ind_ind_DialogPhase_askUnpackValidator_default

is validator: true

TRACE      2015-03-18 11:30:30.646

NWInstall.getSystem(JEP)

TRACE      2015-03-18 11:30:30.648

NWOption(localExeDir).value()

TRACE      2015-03-18 11:30:30.648

NWOption(localExeDir).value() done: true

TRACE      2015-03-18 11:30:30.649

NWOption(collected).value()

TRACE      2015-03-18 11:30:30.649

NWOption(collected).value() done: true

TRACE      2015-03-18 11:30:30.652

NWInstall({

  sid:JEP

  sapDrive:E:

  dbtype:ind

  sapmnt:/sapmnt

  hasABAP:false

  hasJava:true

  isAddinInstallation:undefined

  unicode:true

  workplace:undefined

  loadType:SAP

  umeConfiguration:

  doMigMonConfig:

  useParallelAbapSystemCopy:

  dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile

  os4_krnlib:

  os4_seclanglib:

  useCurrentUser:false

  noShares:false

})

TRACE      2015-03-18 11:30:30.653

NW({

  sid:JEP

  sapDrive:E:

  dbtype:ind

  sapmnt:/sapmnt

  hasABAP:false

  hasJava:true

  isAddinInstallation:undefined

  unicode:true

  workplace:undefined

  loadType:SAP

  umeConfiguration:

  doMigMonConfig:

  useParallelAbapSystemCopy:

  dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile

  os4_krnlib:

  os4_seclanglib:

  useCurrentUser:false

  noShares:false

})

TRACE      2015-03-18 11:30:30.654

NW() done

TRACE      2015-03-18 11:30:30.654

NWInstall() done

TRACE      2015-03-18 11:30:30.654

NWInstall.getSystem() done

TRACE      2015-03-18 11:30:30.655

NWInstall.validateUnpackTable(t_askUnpack)

TRACE      2015-03-18 11:30:30.657

NWInstall.validateUnpackTable(): validating row {

  codepage:Unicode

  destination:E:\usr\sap\JEP\SYS\exe\uc\NTAMD64

  ownPath:

  path:DBINDEP\SAPEXE.SAR

  sid:JEP

  unpack:true

}

TRACE      2015-03-18 11:30:30.659 [tablecpp.cpp:136]

          Table(t_NW_unpack).updateRow({

  cd:UKERNEL

  codepage:Unicode

  confirmUnpack:

  destination:E:\usr\sap\JEP\SYS\exe\uc\NTAMD64

  list:

  needUnpacking:true

  ownPath:

  path:DBINDEP\SAPEXE.SAR

  selectiveExtract:false

  sid:JEP

  unpack:true

  wasUnpacked:false

}, WHERE sid='JEP' AND path='DBINDEP\SAPEXE.SAR' AND codepage='Unicode' AND destination='E:\usr\sap\JEP\SYS\exe\uc\NTAMD64')

updating

TRACE      2015-03-18 11:30:30.661

NWInstall.validateUnpackTable() done

TRACE      2015-03-18 11:30:30.722 [iaxxgenimp.cpp:301]

          CGuiEngineImp::showDialogCalledByJs()

<dialog sid="d_nw_ask_unpack">

<table enabled="true" fixedrows="true" sid="askUnpack">

<caption>Archives to Be Unpacked</caption>

<column enabled="true" type="check" numeric="false" upper="false" name="unpack">

  <caption>Unpack</caption>

  <helpitem id="common.Unpack"/>

  <value type="string">false</value>

</column>

<column enabled="false" type="field" numeric="false" upper="false" name="path">

  <caption>Archive</caption>

  <helpitem id="common.UnpackArchive"/>

</column>

<column enabled="false" type="field" numeric="false" upper="false" name="codepage">

  <caption>Codepage</caption>

  <helpitem id="common.UnpackArchiveCodepage"/>

</column>

<column enabled="false" type="field" numeric="false" upper="false" name="destination">

  <caption>Destination</caption>

  <helpitem id="common.UnpackArchiveDestination"/>

</column>

<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">

  <caption>Downloaded To</caption>

  <helpitem id="common.UnpackArchiveDownload"/>

  <value type="string"/>

</column>

<row rowId="0">

  <boolvalue>

  <true/>

  </boolvalue>

  <value>DBINDEP\SAPEXE.SAR</value>

  <value>Unicode</value>

  <value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>

  <value/>

</row>

</table>

<dialog/>

TRACE      2015-03-18 11:30:30.724 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:30.725 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml

TRACE      2015-03-18 11:30:30.728 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:30.776

The step askUnpack with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0 has been executed successfully.

INFO      2015-03-18 11:30:30.778 [synxccuren.cpp:887]

          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)

          lib=syslib module=syslib

Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.

TRACE      2015-03-18 11:30:30.780 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:30.781 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml

TRACE      2015-03-18 11:30:30.785 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:30.802 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:30.803 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml

TRACE      2015-03-18 11:30:30.806 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:30.819 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:30.842 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml

TRACE      2015-03-18 11:30:30.908 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:30.909 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:30.963 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml

TRACE      2015-03-18 11:30:31.139 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

INFO      2015-03-18 11:30:31.142 [csistepexecute.cpp:1024]

Execute step setDisplayNames of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0

TRACE      2015-03-18 11:30:31.177

  Call block: NW_FirstClusterNode_ind_ind_ind_ind

    function: NW_FirstClusterNode_ind_ind_ind_ind_DialogPhase_setDisplayNames_Preprocess

is validator: false

TRACE      2015-03-18 11:30:31.219 [csistepexecute.cpp:1079]

Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|setDisplayNames returns TRUE

TRACE      2015-03-18 11:30:31.243

  Call block: NW_FirstClusterNode_ind_ind_ind_ind

    function: NW_FirstClusterNode_ind_ind_ind_ind_DialogPhase_setDisplayNames

is validator: false

TRACE      2015-03-18 11:30:31.246

NWInstance.byNumberAndRealHost(00, DCEPPRDCI)

TRACE      2015-03-18 11:30:31.246

NWInstance.find()

TRACE      2015-03-18 11:30:31.248

NWOption(localExeDir).value()

TRACE      2015-03-18 11:30:31.248

NWOption(localExeDir).value() done: true

TRACE      2015-03-18 11:30:31.249

NWOption(collected).value()

TRACE      2015-03-18 11:30:31.249

NWOption(collected).value() done: true

TRACE      2015-03-18 11:30:31.252

NWInstance._fromRow({

  sid:JEP

  name:SCS00

  number:00

  host:SAPJEP

  guid:0

  realhost:dcepprdci

  type:SCS

  installationStatus:installing

  startProfileName:JEP_SCS00_SAPJEP

  instProfilePath:

  dir_profile:

  unicode:false

  collectSource:

})

TRACE      2015-03-18 11:30:31.252

NWSCSInstance()

TRACE      2015-03-18 11:30:31.252

NWInstance(JEP/SCS00/SAPJEP)

TRACE      2015-03-18 11:30:31.252

NWInstance(JEP/SCS00/SAPJEP) done

TRACE      2015-03-18 11:30:31.253

NWInstanceInstall()

TRACE      2015-03-18 11:30:31.253

NWInstanceInstall() done

TRACE      2015-03-18 11:30:31.253

NWInstall.getSystem(JEP)

TRACE      2015-03-18 11:30:31.253

NWOption(localExeDir).value()

TRACE      2015-03-18 11:30:31.254

NWOption(localExeDir).value() done: true

TRACE      2015-03-18 11:30:31.254

NWOption(collected).value()

TRACE      2015-03-18 11:30:31.254

NWOption(collected).value() done: true

TRACE      2015-03-18 11:30:31.256

NWInstall({

  sid:JEP

  sapDrive:E:

  dbtype:ind

  sapmnt:/sapmnt

  hasABAP:false

  hasJava:true

  isAddinInstallation:undefined

  unicode:true

  workplace:undefined

  loadType:SAP

  umeConfiguration:

  doMigMonConfig:

  useParallelAbapSystemCopy:

  dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile

  os4_krnlib:

  os4_seclanglib:

  useCurrentUser:false

  noShares:false

})

TRACE      2015-03-18 11:30:31.257

NW({

  sid:JEP

  sapDrive:E:

  dbtype:ind

  sapmnt:/sapmnt

  hasABAP:false

  hasJava:true

  isAddinInstallation:undefined

  unicode:true

  workplace:undefined

  loadType:SAP

  umeConfiguration:

  doMigMonConfig:

  useParallelAbapSystemCopy:

  dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile

  os4_krnlib:

  os4_seclanglib:

  useCurrentUser:false

  noShares:false

})

TRACE      2015-03-18 11:30:31.258

NW() done

TRACE      2015-03-18 11:30:31.258

NWInstall() done

TRACE      2015-03-18 11:30:31.258

NWInstall.getSystem() done

TRACE      2015-03-18 11:30:31.258

NWSCSInstance() done

TRACE      2015-03-18 11:30:31.259

NWInstance._fromRow() done

TRACE      2015-03-18 11:30:31.259

NWInstance._fromRow({

  sid:JEP

  name:ERS10

  number:10

  host:SAPJEP

  guid:1

  realhost:dcepprdci

  type:ERS

  installationStatus:installing

  startProfileName:JEP_ERS10_SAPJEP

  instProfilePath:

  dir_profile:

  unicode:false

  collectSource:

})

TRACE      2015-03-18 11:30:31.259

NWERSInstance()

TRACE      2015-03-18 11:30:31.260

NWInstance(JEP/ERS10/SAPJEP)

TRACE      2015-03-18 11:30:31.260

NWInstance(JEP/ERS10/SAPJEP) done

TRACE      2015-03-18 11:30:31.260

NWInstanceInstall()

TRACE      2015-03-18 11:30:31.260

NWInstanceInstall() done

TRACE      2015-03-18 11:30:31.261

NWERSInstance() done

TRACE      2015-03-18 11:30:31.261

NWInstance._fromRow() done

TRACE      2015-03-18 11:30:31.261

NWInstance.find() done: 1 instances found

TRACE      2015-03-18 11:30:31.261

t_scs.setDisplayName([nw.progress.installInstance, SCS00], WHERE ROWNUM=0)

TRACE      2015-03-18 11:30:31.305

The step setDisplayNames with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0 has been executed successfully.

INFO      2015-03-18 11:30:31.307 [synxccuren.cpp:887]

          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)

          lib=syslib module=syslib

Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.

TRACE      2015-03-18 11:30:31.362

Build Client for subcomponent |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_FinishFirstClusterNode|ind|ind|ind|ind|finishFirst|0

TRACE      2015-03-18 11:30:31.364

TRACE      2015-03-18 11:30:31.364 [ccdclient.cpp:22]

          CCdClient::CCdClient()

TRACE      2015-03-18 11:30:31.385 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:31.387 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml

TRACE      2015-03-18 11:30:31.390 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:31.406 [cpropertycontentmanager.hpp:220]

          CPropertyContentManager::logMissingParameters()

The following parameters can be set via SAPINST_PARAMETER_CONTAINER_URL (inifile.xml) but not via SAPINST_INPUT_PARAMETERS_URL:

Component 'NW_ERS_Instance': ersInstanceNumber, restartSCS

Component 'NW_GetDomainOU': isOUInstallation, ou_delimiter, windows_domain_ous

Component 'NW_GetSidFromCluster': clusterGroup, isUnicode, localDrive, network, networkName, sharedDrive, sid, useDHCP

Component 'NW_GetUserParameterWindows': sapDomain, sapServiceSIDPassword, sidAdmPassword

Component 'NW_SAPCrypto': installSAPCrypto

Component 'NW_SCS_Instance': instanceNumber, scsMSPort, scsMSPortInternal

Component 'Preinstall': installationMode

INFO      2015-03-18 11:30:31.802 [synxcpath.cpp:799]

          CSyPath::createFile() lib=syslib module=syslib

Creating file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\summary.html.

TRACE      2015-03-18 11:30:31.828 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:31.852 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml

TRACE      2015-03-18 11:30:31.916 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:31.917 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:31.971 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml

TRACE      2015-03-18 11:30:32.152 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:32.154 [sixxbsummary.cpp:320]

          CSiSummaryContainer::showDialog()

<?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog version="1.0" sid="diReviewDialog"> <title>Parameter Summary</title><description>Choose 'Next' to start with the values shown. Otherwise, select the parameters to be changed and choose 'Revise'. You are then taken to the screen where you can change the parameter. You might be guided through other screens that have so far been processed.</description> <review id="review_controll"><caption><![CDATA[Parameter list]]></caption><inputgroup id="ID_1"> <caption><![CDATA[Drive for Local Instances]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_2"><pulldown edit="false" enabled="true" highlight="false" sid="localDrive">

<caption>Destination Drive for Local Instances</caption>

<helpitem id="mscs.SelectLocalDrive"/>

<value>C:</value>

<value>D:</value>

<selectvalue>D:</selectvalue>

</pulldown></input></inputgroup><inputgroup id="ID_3"> <caption><![CDATA[SAP System Cluster Parameters]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_4"><field enabled="true" highlight="false" sid="sid">

<caption>SAP System ID (SAPSID)</caption>

<helpitem id="common.SAPSystemIDCIDB"/>

<value type="upper" maxlength="3" regexp="^[A-Z][A-Z0-9]{2}" minlength="3">JEP</value>

</field></input><input  id="ID_5"><field enabled="true" highlight="false" sid="networkName">

<caption>Network Name (SAP Virtual Instance Host)</caption>

<helpitem id="common.VirtualInstanceHostWindowsMSCS"/>

<value type="string" maxlength="13" minlength="1">SAPJEP</value>

</field></input><input  id="ID_6"><pulldown edit="false" enabled="true" highlight="false" sid="network">

<caption>Use Public Network</caption>

<helpitem id="mscs.UsePublicNetwork"/>

<value>Cluster Network 1</value>

<selectvalue>Cluster Network 1</selectvalue>

</pulldown></input><input  id="ID_7"><pulldown edit="false" enabled="true" highlight="false" sid="sharedDrive">

<caption>Destination Drive for Clustered Instances</caption>

<helpitem id="mscs.SelectSharedDrive"/>

<value>BACKUP</value>

<value>SAP_USR_SID_CI_NODE</value>

<value>SAPDATA1</value>

<value>SAPDATA2</value>

<value>SAPDATA3</value>

<value>SAPDATA4</value>

<value>SAPLOG1</value>

<value>SAPLOG2</value>

<value>SAPTEMP_SAPDIAG_SAPSYBSYSTEM</value>

<value>SYBASE</value>

<selectvalue>SAP_USR_SID_CI_NODE</selectvalue>

</pulldown></input></inputgroup><inputgroup id="ID_8"> <caption><![CDATA[DNS Domain Name]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_9"><check enabled="true" highlight="false" sid="setFQDN">

<caption>Set FQDN for SAP system</caption>

<helpitem id="common.FullyQualifiedDomainNameSelect"/>

<boolvalue>

  <true/>

</boolvalue>

</check></input><input  id="ID_10"><field enabled="true" highlight="false" sid="FQDN" depends="setFQDN">

<caption>DNS Domain Name for SAP System</caption>

<helpitem id="common.FullyQualifiedDomainName"/>

<value type="string" regexp="^[^.]+.*$" minlength="1">jnport.com</value>

</field></input></inputgroup><inputgroup id="ID_11"> <caption><![CDATA[Windows Domain]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_12"><radiobox enabled="true" highlight="false" sid="domainType">

<caption>Domain Model</caption>

<helpitem id="common.DomainModelDomainLocal"/>

<radio enabled="true" sid="global">

  <caption>Domain of Current User</caption>

  <boolvalue>

  <true/>

  </boolvalue>

</radio>

<radio enabled="true" sid="other">

  <caption>Different Domain</caption>

</radio>

</radiobox></input></inputgroup><inputgroup id="ID_13"> <caption><![CDATA[Operating System Users]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_14"><password confirm="true" enabled="true" highlight="false" sid="sidAdmPassword">

<caption>Password of SAP System Administrator</caption>

<helpitem id="common.PasswordCreateExistsOS"/>

<encrvalue maxlength="63">*****</encrvalue>

</password></input><input  id="ID_15"><password confirm="true" enabled="true" highlight="false" sid="sapServiceSIDPassword">

<caption>Password of SAP System Service User</caption>

<helpitem id="common.PasswordCreateExistsOS"/>

<encrvalue maxlength="63">*****</encrvalue>

</password></input></inputgroup><inputgroup id="ID_16"> <caption><![CDATA[Windows Domain for SAP Host Agent]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_17"><radiobox enabled="true" highlight="false" sid="domainType">

<caption>Domain Model</caption>

<helpitem id="common.DomainModelDomainLocal"/>

<radio enabled="true" sid="local">

  <caption>Local Domain</caption>

  <boolvalue>

  <true/>

  </boolvalue>

</radio>

<radio enabled="true" sid="global">

  <caption>Domain of Current User</caption>

</radio>

<radio enabled="true" sid="other">

  <caption>Different Domain</caption>

</radio>

</radiobox></input></inputgroup><inputgroup id="ID_18"> <caption><![CDATA[Operating System Users]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_19"><password confirm="true" enabled="true" highlight="false" sid="sidAdmPassword">

<caption>Password of SAP System Administrator</caption>

<helpitem id="common.PasswordCreateExistsOS"/>

<encrvalue maxlength="63">*****</encrvalue>

</password></input></inputgroup><inputgroup id="ID_20"> <caption><![CDATA[SCS Instance]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_21"><field enabled="true" highlight="false" sid="instanceNumber">

<caption>SCS Instance Number</caption>

<helpitem id="common.InstanceNumberCreate"/>

<value type="string" maxlength="2" regexp="[0-9]{2}" minlength="2">00</value>

</field></input></inputgroup><inputgroup id="ID_22"> <caption><![CDATA[Java Message Server Port]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_23"><field enabled="true" highlight="false" sid="scsMSPortInternal">

<caption>Internal Java Message Server Port</caption>

<helpitem id="common.InternalMessagePort"/>

<value type="numeric" maxlength="5" min="1025" max="65535">3900</value>

</field></input></inputgroup><inputgroup id="ID_24"> <caption><![CDATA[Enqueue Replication Server  Instance]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_25"><field enabled="true" highlight="false" sid="ersInstanceNumber">

<caption>Number of the ERS Instance</caption>

<helpitem id="common.InstanceNumberCreate"/>

<value type="numeric" maxlength="2" max="99" minlength="2">10</value>

</field></input><input  id="ID_26"><field enabled="true" highlight="false" sid="ersVirtualHostname">

<caption>ERS Instance - Virtual Host Name</caption>

<helpitem id="common.virtualHostname"/>

<value type="string" maxlength="60" minlength="1">SAPJEP</value>

</field></input></inputgroup><inputgroup id="ID_27"> <caption><![CDATA[Unpack Archives]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_28"><table enabled="true" fixedrows="true" sid="askUnpack">

<caption>Archives to Be Unpacked</caption>

<column enabled="true" type="check" numeric="false" upper="false" name="unpack">

  <caption>Unpack</caption>

  <helpitem id="common.Unpack"/>

  <value type="string">false</value>

</column>

<column enabled="false" type="field" numeric="false" upper="false" name="path">

  <caption>Archive</caption>

  <helpitem id="common.UnpackArchive"/>

</column>

<column enabled="false" type="field" numeric="false" upper="false" name="codepage">

  <caption>Codepage</caption>

  <helpitem id="common.UnpackArchiveCodepage"/>

</column>

<column enabled="false" type="field" numeric="false" upper="false" name="destination">

  <caption>Destination</caption>

  <helpitem id="common.UnpackArchiveDestination"/>

</column>

<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">

  <caption>Downloaded To</caption>

  <helpitem id="common.UnpackArchiveDownload"/>

  <value type="string"/>

</column>

<row rowId="0">

  <boolvalue>

  <true/>

  </boolvalue>

  <value>DBINDEP\SAPEXE.SAR</value>

  <value>Unicode</value>

  <value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>

  <value/>

</row>

</table></input></inputgroup></review><button sid="btPREV" default="false" enabled="false" ><caption>&lt; &amp;Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" default="true"><caption>&amp;Next</caption><action>ACTION_NEXT</action><tooltiphelp><![CDATA[Continue processing]]></tooltiphelp></button><button sid="btEDIT"><caption>&amp;Revise</caption><action>ACTION_EDIT</action><tooltiphelp><![CDATA[Edit input values]]></tooltiphelp></button><button sid="btDETAIL" default="true"><caption>Show &amp;Detail</caption><action>ACTION_CBD_DETAIL</action><tooltiphelp><![CDATA[Show all input values]]></tooltiphelp></button></dialog></sapinstgui>

TRACE      2015-03-18 11:30:32.161 [iaxxgenimp.cpp:1031]

          CGuiEngineImp::acceptAnswerForBlockingRequest

Waiting for an answer from GUI

TRACE      2015-03-18 11:30:33.330 [sixxbsummary.cpp:83]

          CSiSummaryContainer::setDocument(const iXMLDocument & doc)

<?xml version="1.0" encoding="utf-8"?>

<sapinstguiresp>

<action>ACTION_NEXT</action>

<dialog sid="diReviewDialog">

  <review id="review_controll"/>

</dialog>

</sapinstguiresp>

TRACE      2015-03-18 11:30:33.331 [iaxxdlghnd.cpp:96]

          CDialogHandler::doHandleDoc()

CDialogHandler: ACTION_NEXT requested

TRACE      2015-03-18 11:30:33.331 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:33.356 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml

TRACE      2015-03-18 11:30:33.375 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:33.375 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:33.429 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml

TRACE      2015-03-18 11:30:33.500 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:33.773

Status of Step |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0|ntpatch2 is not OK. So we have to restart at this point.

TRACE      2015-03-18 11:30:33.773

Switch to STANDARD mode

TRACE      2015-03-18 11:30:33.773 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:33.801 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml

TRACE      2015-03-18 11:30:33.866 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:33.868 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:33.926 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml

TRACE      2015-03-18 11:30:34.67 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

INFO      2015-03-18 11:30:34.67 [csistepexecute.cpp:1024]

Execute step ntpatch2 of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0

TRACE      2015-03-18 11:30:34.084

  Call block: NW_Update_DLLs_ind_ind_ind_ind

    function: NW_Update_DLLs_ind_ind_ind_ind_SubComponentContainer_ntpatch2_Preprocess

is validator: false

TRACE      2015-03-18 11:30:34.115 [csistepexecute.cpp:1079]

Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0|ntpatch2 returns TRUE

TRACE      2015-03-18 11:30:34.127

  Call block: NW_Update_DLLs_ind_ind_ind_ind

    function: NW_Update_DLLs_ind_ind_ind_ind_SubComponentContainer_ntpatch2

is validator: false

TRACE      2015-03-18 11:30:34.127

NW_Update_DLLs.installDLLs(false)

TRACE      2015-03-18 11:30:34.127

NW_Update_DLLs.installDLLs() already run

TRACE      2015-03-18 11:30:34.153

The step ntpatch2 with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0 has been executed successfully.

INFO      2015-03-18 11:30:34.154 [synxccuren.cpp:887]

          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)

          lib=syslib module=syslib

Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.

TRACE      2015-03-18 11:30:34.187 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:34.200 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml

TRACE      2015-03-18 11:30:34.255 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:34.256 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:34.283 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml

TRACE      2015-03-18 11:30:34.425 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

INFO      2015-03-18 11:30:34.426 [csistepexecute.cpp:1024]

Execute step adaptInstanceProfiles of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|NW_getFQDN|ind|ind|ind|ind|fqdn|0

TRACE      2015-03-18 11:30:34.445

  Call block: NW_getFQDN_ind_ind_ind_ind

    function: NW_getFQDN_ind_ind_ind_ind_SubComponentContainer_adaptInstanceProfiles_Preprocess

is validator: false

TRACE      2015-03-18 11:30:34.471 [csistepexecute.cpp:1093]

Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|NW_getFQDN|ind|ind|ind|ind|fqdn|0|adaptInstanceProfiles returns FALSE

TRACE      2015-03-18 11:30:34.471

The step adaptInstanceProfiles with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|NW_getFQDN|ind|ind|ind|ind|fqdn|0 has been executed successfully.

INFO      2015-03-18 11:30:34.472 [synxccuren.cpp:887]

          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)

          lib=syslib module=syslib

Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.

TRACE      2015-03-18 11:30:34.492 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:34.509 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml

TRACE      2015-03-18 11:30:34.562 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:34.562 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:34.598 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml

TRACE      2015-03-18 11:30:34.744 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

INFO      2015-03-18 11:30:34.745 [csistepexecute.cpp:1024]

Execute step extractClusterDLLs of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0

TRACE      2015-03-18 11:30:34.749 [csistepexecute.cpp:1079]

Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|extractClusterDLLs returns TRUE

TRACE      2015-03-18 11:30:34.762

  Call block: NW_GetSidFromCluster_ind_ind_ind_ind

    function: NW_GetSidFromCluster_ind_ind_ind_ind_SubComponentContainer_extractClusterDLLs

is validator: false

TRACE      2015-03-18 11:30:34.762 [ccdclient.cpp:75]

          CCdClient::existPackage()

Searching for packages: required and found: SAPINST

TRACE      2015-03-18 11:30:34.770 [ccdclient.cpp:95]

          CCdClient::getLocation()

Get CD location for packages: name: SAPINST, location: D:\swpm

TRACE      2015-03-18 11:30:34.776 [synxcchapp.cpp:275]

          CSyChildApplicationImpl::doStart() lib=syslib module=syslib

Going to call CreateProcess/CreateProcessAsUser for 'C:\Users\pmcadmin\AppData\Local\Temp\2\sapinst_exe.3620.1426658166\SAPCAR.exe' now.

TRACE      2015-03-18 11:30:34.776 [synxcchapp.cpp:575]

          CSyChildApplicationImpl::doStart() lib=syslib module=syslib

Trying to start C:\Users\pmcadmin\AppData\Local\Temp\2\sapinst_exe.3620.1426658166\SAPCAR.exe CSySysLibCallsWrapper::syscallwrapper()->__CreateProcess__(NULL, <command line for executable C:\Users\pmcadmin\AppData\Local\Temp\2\sapinst_exe.3620.1426658166\SAPCAR.exe, NULL, NULL, TRUE, 0x420, NULL, NULL, &StartupInfo, &ProcessInfo)

TRACE      2015-03-18 11:30:34.780 [synxcchapp.cpp:653]

          CSyChildApplicationImpl::doStart() lib=syslib module=syslib

A child process has been started. Pid = 4680. Executable name: C:\Users\pmcadmin\AppData\Local\Temp\2\sapinst_exe.3620.1426658166\SAPCAR.exe

INFO      2015-03-18 11:30:34.795 [synxcpath.cpp:799]

          CSyPath::createFile() lib=syslib module=syslib

Creating file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\NTCLUST.log.

INFO      2015-03-18 11:30:34.798

          CJSlibModule::writeInfo_impl()

Output of C:\Users\pmcadmin\AppData\Local\Temp\2\sapinst_exe.3620.1426658166\SAPCAR.exe is written to the logfile NTCLUST.log.

TRACE      2015-03-18 11:30:35.75 [synxcpipe.cpp:163]

          CSyStdIOPipe::waitForOverlappedIO(int timeout)

          lib=syslib module=syslib

Syslib info about system call. OS message 109 (The pipe has been ended.

) after execution of system call 'GetOverlappedResult' with parameter ((pipe to child process)), line (133) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcpipe.cpp).

INFO      2015-03-18 11:30:35.076

          CJSlibModule::writeInfo_impl()

Output of C:\Users\pmcadmin\AppData\Local\Temp\2\sapinst_exe.3620.1426658166\SAPCAR.exe -x -v -i -f D:\swpm/NTCLUST.SAR,:

SAPCAR: processing archive D:\swpm/NTCLUST.SAR (version 2.01)

x NTCLUSTER/SapClus.dll

x NTCLUSTER/SapClus.pdb

x NTCLUSTER/Saprc.dll

x NTCLUSTER/Saprc.pdb

x NTCLUSTER/Saprcex.dll

x NTCLUSTER/Saprcex.pdb

x EXE/disablewp.exe

x NTCLUSTER/disaprct.exe

x EXE/enablewp.exe

x NTCLUSTER/insaprct.exe

x NTCLUSTER/takeresoff.exe

x NTCLUSTER/takereson.exe

SAPCAR: 12 file(s) extracted

TRACE      2015-03-18 11:30:35.080

Returncode of C:\Users\pmcadmin\AppData\Local\Temp\2\sapinst_exe.3620.1426658166\SAPCAR.exe: 0

TRACE      2015-03-18 11:30:35.122

The step extractClusterDLLs with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0 has been executed successfully.

INFO      2015-03-18 11:30:35.124 [synxccuren.cpp:887]

          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)

          lib=syslib module=syslib

Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.

TRACE      2015-03-18 11:30:35.126 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:35.142 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml

TRACE      2015-03-18 11:30:35.199 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:35.200 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:35.248 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml

TRACE      2015-03-18 11:30:35.428 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

INFO      2015-03-18 11:30:35.429 [csistepexecute.cpp:1024]

Execute step copyClusterDLLs of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0

TRACE      2015-03-18 11:30:35.439 [csistepexecute.cpp:1079]

Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|copyClusterDLLs returns TRUE

TRACE      2015-03-18 11:30:35.464

  Call block: NW_GetSidFromCluster_ind_ind_ind_ind

    function: NW_GetSidFromCluster_ind_ind_ind_ind_SubComponentContainer_copyClusterDLLs

is validator: false

INFO      2015-03-18 11:30:35.492

          CJSlibModule::writeInfo_impl()

Node C:\Windows\System32 already exists.

TRACE      2015-03-18 11:30:35.507 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\NTCLUSTER\disaprct.exe has version 7200.715.23.37333

TRACE      2015-03-18 11:30:35.510 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Windows\System32\disaprct.exe has version 7200.715.23.37333

TRACE      2015-03-18 11:30:35.510 [syxxcfile.cpp:179]

          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Windows/System32/disaprct.exe, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x221, PSyNodeInt &) const

          lib=syslib module=syslib

Version of C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/disaprct.exe (7200.715.23.37333) is not higher than version of C:/Windows/System32/disaprct.exe (7200.715.23.37333). I will not copy/move.

TRACE      2015-03-18 11:30:35.511 [synxcfile.cpp:483]

          CSyFileImpl::copy(const CSyPath & C:/Windows/System32, ISyNode::CopyMoveMode_t 0x221, ISyProgressObserver*) const

          lib=syslib module=syslib

I will not copy C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/disaprct.exe to C:/Windows/System32

TRACE      2015-03-18 11:30:35.522 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\NTCLUSTER\insaprct.exe has version 7200.715.23.37333

TRACE      2015-03-18 11:30:35.524 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Windows\System32\insaprct.exe has version 7200.715.23.37333

TRACE      2015-03-18 11:30:35.525 [syxxcfile.cpp:179]

          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Windows/System32/insaprct.exe, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x221, PSyNodeInt &) const

          lib=syslib module=syslib

Version of C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/insaprct.exe (7200.715.23.37333) is not higher than version of C:/Windows/System32/insaprct.exe (7200.715.23.37333). I will not copy/move.

TRACE      2015-03-18 11:30:35.525 [synxcfile.cpp:483]

          CSyFileImpl::copy(const CSyPath & C:/Windows/System32, ISyNode::CopyMoveMode_t 0x221, ISyProgressObserver*) const

          lib=syslib module=syslib

I will not copy C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/insaprct.exe to C:/Windows/System32

TRACE      2015-03-18 11:30:35.536 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\NTCLUSTER\SapClus.dll has version 7200.715.23.37333

TRACE      2015-03-18 11:30:35.538 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Windows\System32\SapClus.dll has version 7200.715.23.37333

TRACE      2015-03-18 11:30:35.539 [syxxcfile.cpp:179]

          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Windows/System32/SapClus.dll, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x221, PSyNodeInt &) const

          lib=syslib module=syslib

Version of C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/SapClus.dll (7200.715.23.37333) is not higher than version of C:/Windows/System32/SapClus.dll (7200.715.23.37333). I will not copy/move.

TRACE      2015-03-18 11:30:35.539 [synxcfile.cpp:483]

          CSyFileImpl::copy(const CSyPath & C:/Windows/System32, ISyNode::CopyMoveMode_t 0x221, ISyProgressObserver*) const

          lib=syslib module=syslib

I will not copy C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/SapClus.dll to C:/Windows/System32

TRACE      2015-03-18 11:30:35.569 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\NTCLUSTER\SapClus.pdb has version

TRACE      2015-03-18 11:30:35.593 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Windows\System32\SapClus.pdb has version

TRACE      2015-03-18 11:30:35.593 [syxxcfile.cpp:140]

          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Windows/System32/SapClus.pdb, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x221, PSyNodeInt &) const

          lib=syslib module=syslib

Version of C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/SapClus.pdb () is higher than version of C:/Windows/System32/SapClus.pdb (). I will copy/move.

TRACE      2015-03-18 11:30:35.593 [synxcfile.cpp:478]

          CSyFileImpl::copy(const CSyPath & C:/Windows/System32, ISyNode::CopyMoveMode_t 0x221, ISyProgressObserver*) const

          lib=syslib module=syslib

Copying file C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/SapClus.pdb to C:/Windows/System32

INFO      2015-03-18 11:30:35.623 [synxcfile.cpp:591]

          CSyFileImpl::copy(const CSyPath & C:/Windows/System32, ISyNode::CopyMoveMode_t 0x221, ISyProgressObserver*) const

          lib=syslib module=syslib

Copied file 'C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/SapClus.pdb' to 'C:/Windows/System32'.

TRACE      2015-03-18 11:30:35.639 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\NTCLUSTER\Saprc.dll has version 7200.715.23.37333

TRACE      2015-03-18 11:30:35.641 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Windows\System32\Saprc.dll has version 7200.715.23.37333

TRACE      2015-03-18 11:30:35.642 [syxxcfile.cpp:179]

          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Windows/System32/Saprc.dll, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x221, PSyNodeInt &) const

          lib=syslib module=syslib

Version of C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/Saprc.dll (7200.715.23.37333) is not higher than version of C:/Windows/System32/Saprc.dll (7200.715.23.37333). I will not copy/move.

TRACE      2015-03-18 11:30:35.642 [synxcfile.cpp:483]

          CSyFileImpl::copy(const CSyPath & C:/Windows/System32, ISyNode::CopyMoveMode_t 0x221, ISyProgressObserver*) const

          lib=syslib module=syslib

I will not copy C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/Saprc.dll to C:/Windows/System32

TRACE      2015-03-18 11:30:35.667 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\NTCLUSTER\Saprc.pdb has version

TRACE      2015-03-18 11:30:35.687 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Windows\System32\Saprc.pdb has version

TRACE      2015-03-18 11:30:35.687 [syxxcfile.cpp:140]

          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Windows/System32/Saprc.pdb, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x221, PSyNodeInt &) const

          lib=syslib module=syslib

Version of C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/Saprc.pdb () is higher than version of C:/Windows/System32/Saprc.pdb (). I will copy/move.

TRACE      2015-03-18 11:30:35.688 [synxcfile.cpp:478]

          CSyFileImpl::copy(const CSyPath & C:/Windows/System32, ISyNode::CopyMoveMode_t 0x221, ISyProgressObserver*) const

          lib=syslib module=syslib

Copying file C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/Saprc.pdb to C:/Windows/System32

INFO      2015-03-18 11:30:35.711 [synxcfile.cpp:591]

          CSyFileImpl::copy(const CSyPath & C:/Windows/System32, ISyNode::CopyMoveMode_t 0x221, ISyProgressObserver*) const

          lib=syslib module=syslib

Copied file 'C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/Saprc.pdb' to 'C:/Windows/System32'.

TRACE      2015-03-18 11:30:35.723 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\NTCLUSTER\Saprcex.dll has version 7200.715.23.37333

TRACE      2015-03-18 11:30:35.726 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Windows\System32\Saprcex.dll has version 7200.715.23.37333

TRACE      2015-03-18 11:30:35.726 [syxxcfile.cpp:179]

          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Windows/System32/Saprcex.dll, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x221, PSyNodeInt &) const

          lib=syslib module=syslib

Version of C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/Saprcex.dll (7200.715.23.37333) is not higher than version of C:/Windows/System32/Saprcex.dll (7200.715.23.37333). I will not copy/move.

TRACE      2015-03-18 11:30:35.726 [synxcfile.cpp:483]

          CSyFileImpl::copy(const CSyPath & C:/Windows/System32, ISyNode::CopyMoveMode_t 0x221, ISyProgressObserver*) const

          lib=syslib module=syslib

I will not copy C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/Saprcex.dll to C:/Windows/System32

TRACE      2015-03-18 11:30:35.757 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\NTCLUSTER\Saprcex.pdb has version

TRACE      2015-03-18 11:30:35.780 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Windows\System32\Saprcex.pdb has version

TRACE      2015-03-18 11:30:35.781 [syxxcfile.cpp:140]

          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Windows/System32/Saprcex.pdb, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x221, PSyNodeInt &) const

          lib=syslib module=syslib

Version of C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/Saprcex.pdb () is higher than version of C:/Windows/System32/Saprcex.pdb (). I will copy/move.

TRACE      2015-03-18 11:30:35.781 [synxcfile.cpp:478]

          CSyFileImpl::copy(const CSyPath & C:/Windows/System32, ISyNode::CopyMoveMode_t 0x221, ISyProgressObserver*) const

          lib=syslib module=syslib

Copying file C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/Saprcex.pdb to C:/Windows/System32

INFO      2015-03-18 11:30:35.811 [synxcfile.cpp:591]

          CSyFileImpl::copy(const CSyPath & C:/Windows/System32, ISyNode::CopyMoveMode_t 0x221, ISyProgressObserver*) const

          lib=syslib module=syslib

Copied file 'C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/Saprcex.pdb' to 'C:/Windows/System32'.

TRACE      2015-03-18 11:30:35.822 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\NTCLUSTER\takeresoff.exe has version 7200.715.23.37333

TRACE      2015-03-18 11:30:35.824 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Windows\System32\takeresoff.exe has version 7200.715.23.37333

TRACE      2015-03-18 11:30:35.824 [syxxcfile.cpp:179]

          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Windows/System32/takeresoff.exe, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x221, PSyNodeInt &) const

          lib=syslib module=syslib

Version of C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/takeresoff.exe (7200.715.23.37333) is not higher than version of C:/Windows/System32/takeresoff.exe (7200.715.23.37333). I will not copy/move.

TRACE      2015-03-18 11:30:35.825 [synxcfile.cpp:483]

          CSyFileImpl::copy(const CSyPath & C:/Windows/System32, ISyNode::CopyMoveMode_t 0x221, ISyProgressObserver*) const

          lib=syslib module=syslib

I will not copy C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/takeresoff.exe to C:/Windows/System32

TRACE      2015-03-18 11:30:35.835 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\NTCLUSTER\takereson.exe has version 7200.715.23.37333

TRACE      2015-03-18 11:30:35.838 [synxcfile.cpp:125]

          CSyFileImpl::getFileVersion() lib=syslib module=syslib

file C:\Windows\System32\takereson.exe has version 7200.715.23.37333

TRACE      2015-03-18 11:30:35.838 [syxxcfile.cpp:179]

          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Windows/System32/takereson.exe, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x221, PSyNodeInt &) const

          lib=syslib module=syslib

Version of C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/takereson.exe (7200.715.23.37333) is not higher than version of C:/Windows/System32/takereson.exe (7200.715.23.37333). I will not copy/move.

TRACE      2015-03-18 11:30:35.838 [synxcfile.cpp:483]

          CSyFileImpl::copy(const CSyPath & C:/Windows/System32, ISyNode::CopyMoveMode_t 0x221, ISyProgressObserver*) const

          lib=syslib module=syslib

I will not copy C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1/NTCLUSTER/takereson.exe to C:/Windows/System32

TRACE      2015-03-18 11:30:35.894

The step copyClusterDLLs with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0 has been executed successfully.

INFO      2015-03-18 11:30:35.896 [synxccuren.cpp:887]

          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)

          lib=syslib module=syslib

Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.

TRACE      2015-03-18 11:30:35.900 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:35.928 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml

TRACE      2015-03-18 11:30:35.994 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:35.995 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:36.51 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml

TRACE      2015-03-18 11:30:36.236 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

INFO      2015-03-18 11:30:36.238 [csistepexecute.cpp:1024]

Execute step registerClusterDLLs of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0

TRACE      2015-03-18 11:30:36.247 [csistepexecute.cpp:1079]

Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|registerClusterDLLs returns TRUE

TRACE      2015-03-18 11:30:36.273

  Call block: NW_GetSidFromCluster_ind_ind_ind_ind

    function: NW_GetSidFromCluster_ind_ind_ind_ind_SubComponentContainer_registerClusterDLLs

is validator: false

INFO      2015-03-18 11:30:36.283

          CJSlibModule::writeInfo_impl()

Node C:\Windows\System32 already exists.

INFO      2015-03-18 11:30:36.330 [synxcpath.cpp:799]

          CSyPath::createFile() lib=syslib module=syslib

Creating file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\insaprct.exe.log.

TRACE      2015-03-18 11:30:36.338 [synxcchapp.cpp:275]

          CSyChildApplicationImpl::doStart() lib=syslib module=syslib

Going to call CreateProcess/CreateProcessAsUser for 'C:\Windows\System32\insaprct.exe' now.

TRACE      2015-03-18 11:30:36.339 [synxcchapp.cpp:575]

          CSyChildApplicationImpl::doStart() lib=syslib module=syslib

Trying to start C:\Windows\System32\insaprct.exe CSySysLibCallsWrapper::syscallwrapper()->__CreateProcess__(NULL, <command line for executable C:\Windows\System32\insaprct.exe, NULL, NULL, TRUE, 0x420, NULL, NULL, &StartupInfo, &ProcessInfo)

TRACE      2015-03-18 11:30:36.342 [synxcchapp.cpp:653]

          CSyChildApplicationImpl::doStart() lib=syslib module=syslib

A child process has been started. Pid = 3988. Executable name: C:\Windows\System32\insaprct.exe

INFO      2015-03-18 11:30:36.345

          CJSlibModule::writeInfo_impl()

Output of C:\Windows\System32\insaprct.exe is written to the logfile insaprct.exe.log.

TRACE      2015-03-18 11:30:36.428 [synxcpipe.cpp:163]

          CSyStdOutErrPipe::onUnderflow(void * buf, int maxBytes, int timeout)

          lib=syslib module=syslib

Syslib info about system call. OS message 109 (The pipe has been ended.

) after execution of system call 'ReadFile' with parameter ((CSySysLibCallsWrapper::syscallwrapper()->__read__ end of child process output pipe)), line (385) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcpipe.cpp).

INFO      2015-03-18 11:30:36.432

          CJSlibModule::writeInfo_impl()

Execution of the command "C:\Windows\System32\insaprct.exe" finished with return code 0. Output:

  SAP Resource

Resourcetype "SAP Resource" successfully installed

TRACE      2015-03-18 11:30:36.490

The step registerClusterDLLs with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0 has been executed successfully.

INFO      2015-03-18 11:30:36.492 [synxccuren.cpp:887]

          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)

          lib=syslib module=syslib

Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.

TRACE      2015-03-18 11:30:36.495 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:36.530 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml

TRACE      2015-03-18 11:30:36.594 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:36.594 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:36.664 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml

TRACE      2015-03-18 11:30:36.850 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

INFO      2015-03-18 11:30:36.852 [csistepexecute.cpp:1024]

Execute step createSAPClusterGroup of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0

TRACE      2015-03-18 11:30:36.862 [csistepexecute.cpp:1079]

Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|createSAPClusterGroup returns TRUE

TRACE      2015-03-18 11:30:36.888

  Call block: NW_GetSidFromCluster_ind_ind_ind_ind

    function: NW_GetSidFromCluster_ind_ind_ind_ind_SubComponentContainer_createSAPClusterGroup

is validator: false

TRACE      2015-03-18 11:30:36.893

ClusterMgt.createClusterGroup(SAP JEP)

TRACE      2015-03-18 11:30:36.903

ClusterGroup(SAP JEP)

TRACE      2015-03-18 11:30:36.903

ClusterGroup() done

TRACE      2015-03-18 11:30:36.904

ClusterMgt.createClusterGroup() done: ClusterGroup(SAP JEP)

TRACE      2015-03-18 11:30:36.957

The step createSAPClusterGroup with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0 has been executed successfully.

INFO      2015-03-18 11:30:36.958 [synxccuren.cpp:887]

          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)

          lib=syslib module=syslib

Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.

TRACE      2015-03-18 11:30:36.962 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:36.988 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml

TRACE      2015-03-18 11:30:37.53 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:37.53 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:37.86 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml

TRACE      2015-03-18 11:30:37.234 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

INFO      2015-03-18 11:30:37.235 [csistepexecute.cpp:1024]

Execute step moveClusterGroupToThisNode of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0

TRACE      2015-03-18 11:30:37.241 [csistepexecute.cpp:1079]

Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|moveClusterGroupToThisNode returns TRUE

TRACE      2015-03-18 11:30:37.264

  Call block: NW_GetSidFromCluster_ind_ind_ind_ind

    function: NW_GetSidFromCluster_ind_ind_ind_ind_SubComponentContainer_moveClusterGroupToThisNode

is validator: false

TRACE      2015-03-18 11:30:37.271

ClusterGroup(SAP JEP)

TRACE      2015-03-18 11:30:37.271

ClusterGroup() done

TRACE      2015-03-18 11:30:37.272

ClusterGroup(SAP JEP).moveToThisNode()

TRACE      2015-03-18 11:30:37.272

ClusterMgt.getThisClusterNode()

TRACE      2015-03-18 11:30:37.274

ClusterNode(DCEPPRDCI)

TRACE      2015-03-18 11:30:37.275

ClusterNode(DCEPPRDCI) done

TRACE      2015-03-18 11:30:37.275

ClusterMgt.getThisClusterNode() done: ClusterNode(DCEPPRDCI)

TRACE      2015-03-18 11:30:37.277

ClusterGroup(SAP JEP).moveToNode(ClusterNode(DCEPPRDCI))

TRACE      2015-03-18 11:30:37.282 [clustergroup.cpp:238]

          Cluster::ClusterGroup::moveToNode(DCEPPRDCI)

ClusterGroup is already on node ClusterNode(DCEPPRDCI)

TRACE      2015-03-18 11:30:37.283

ClusterGroup(SAP JEP).moveToNode() done

TRACE      2015-03-18 11:30:37.332

The step moveClusterGroupToThisNode with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0 has been executed successfully.

INFO      2015-03-18 11:30:37.334 [synxccuren.cpp:887]

          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)

          lib=syslib module=syslib

Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.

TRACE      2015-03-18 11:30:37.338 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:37.364 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml

TRACE      2015-03-18 11:30:37.429 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:37.430 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:37.499 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml

TRACE      2015-03-18 11:30:37.688 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

INFO      2015-03-18 11:30:37.690 [csistepexecute.cpp:1024]

Execute step assignDiskToClusterGroup of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0

TRACE      2015-03-18 11:30:37.700 [csistepexecute.cpp:1079]

Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|assignDiskToClusterGroup returns TRUE

TRACE      2015-03-18 11:30:37.727

  Call block: NW_GetSidFromCluster_ind_ind_ind_ind

    function: NW_GetSidFromCluster_ind_ind_ind_ind_SubComponentContainer_assignDiskToClusterGroup

is validator: false

TRACE      2015-03-18 11:30:37.732

ClusterMgt.getClusterGroup(SAP JEP)

TRACE      2015-03-18 11:30:37.734

ClusterGroup(SAP JEP)

TRACE      2015-03-18 11:30:37.734

ClusterGroup() done

TRACE      2015-03-18 11:30:37.735

ClusterMgt.getClusterGroup() done: ClusterGroup(SAP JEP)

TRACE      2015-03-18 11:30:37.737

ClusterDrive(SAP_USR_SID_CI_NODE)

TRACE      2015-03-18 11:30:37.739

ClusterResource(SAP_USR_SID_CI_NODE, Physical Disk)

TRACE      2015-03-18 11:30:37.740

ClusterResource(SAP_USR_SID_CI_NODE, Physical Disk) done

TRACE      2015-03-18 11:30:37.741

ClusterDrive() done

TRACE      2015-03-18 11:30:37.742

ClusterGroup(SAP JEP).assignDrive(ClusterDrive(SAP_USR_SID_CI_NODE))

TRACE      2015-03-18 11:30:37.742

ClusterDrive(SAP_USR_SID_CI_NODE).moveToClusterGroup(ClusterGroup(SAP JEP))

TRACE      2015-03-18 11:30:37.826 [clusterresource.cpp:554]

          Cluster::ClusterResource::moveToClusterGroup()

Moved ClusterResource(SAP_USR_SID_CI_NODE, Physical Disk) to ClusterGroup(SAP JEP)

TRACE      2015-03-18 11:30:37.827

ClusterDrive(SAP_USR_SID_CI_NODE).moveToClusterGroup() done

TRACE      2015-03-18 11:30:37.828

ClusterGroup(SAP JEP).assignDrive() done: ClusterDrive(SAP_USR_SID_CI_NODE)

TRACE      2015-03-18 11:30:37.881

The step assignDiskToClusterGroup with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0 has been executed successfully.

INFO      2015-03-18 11:30:37.883 [synxccuren.cpp:887]

          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)

          lib=syslib module=syslib

Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.

TRACE      2015-03-18 11:30:37.886 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:37.913 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml

TRACE      2015-03-18 11:30:37.978 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

TRACE      2015-03-18 11:30:37.979 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:38.47 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml

TRACE      2015-03-18 11:30:38.195 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

INFO      2015-03-18 11:30:38.196 [csistepexecute.cpp:1024]

Execute step assignNetworknameToClusterGroup of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0

TRACE      2015-03-18 11:30:38.204 [csistepexecute.cpp:1079]

Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|assignNetworknameToClusterGroup returns TRUE

TRACE      2015-03-18 11:30:38.231

  Call block: NW_GetSidFromCluster_ind_ind_ind_ind

    function: NW_GetSidFromCluster_ind_ind_ind_ind_SubComponentContainer_assignNetworknameToClusterGroup

is validator: false

TRACE      2015-03-18 11:30:38.237

ClusterMgt.getClusterGroup(SAP JEP)

TRACE      2015-03-18 11:30:38.239

ClusterGroup(SAP JEP)

TRACE      2015-03-18 11:30:38.239

ClusterGroup() done

TRACE      2015-03-18 11:30:38.240

ClusterMgt.getClusterGroup() done: ClusterGroup(SAP JEP)

TRACE      2015-03-18 11:30:38.241

ClusterNetwork.fromRow({

  name:Cluster Network 1

  address:10.100.2.0

  addressMask:255.255.255.0

  role:Mixed

})

TRACE      2015-03-18 11:30:38.242

ClusterMgt.getClusterNetwork(Cluster Network 1)

TRACE      2015-03-18 11:30:38.246

ClusterNetwork(Cluster Network 1, 10.100.2.0, 255.255.255.0, Mixed)

TRACE      2015-03-18 11:30:38.247

ClusterMgt.getClusterNetwork() done: ClusterNetwork(Cluster Network 1)

TRACE      2015-03-18 11:30:38.247

ClusterNetwork.fromRow() done: ClusterNetwork(Cluster Network 1)

TRACE      2015-03-18 11:30:38.249

ClusterGroup(SAP JEP).assignNetworkName(SAPJEP, false, ClusterNetwork(Cluster Network 1))

TRACE      2015-03-18 11:30:38.249

ClusterGroup(SAP JEP).createIPAddress(SAP JEP IP, false)

TRACE      2015-03-18 11:30:38.250

ClusterGroup(SAP JEP)._createResource(SAP JEP IP, IP Address)

TRACE      2015-03-18 11:30:38.287

ClusterIPAddress(SAP JEP IP)

TRACE      2015-03-18 11:30:38.289

ClusterResource(SAP JEP IP, IP Address)

TRACE      2015-03-18 11:30:38.291

ClusterResource(SAP JEP IP, IP Address) done

TRACE      2015-03-18 11:30:38.291

ClusterIPAddress(SAP JEP IP) done

TRACE      2015-03-18 11:30:38.292

ClusterGroup(SAP JEP)._createResource() done: ClusterIPAddress(SAP JEP IP)

TRACE      2015-03-18 11:30:38.293

ClusterGroup(SAP JEP).createIPAddress() done: ClusterIPAddress(SAP JEP IP)

TRACE      2015-03-18 11:30:38.294

ClusterIPAddress(SAP JEP IP).configureStatic(ClusterNetwork(Cluster Network 1), SAPJEP)

TRACE      2015-03-18 11:30:38.294

ClusterIPAddress(SAP JEP IP).bringOffline()

TRACE      2015-03-18 11:30:38.319 [clusterresource.cpp:440]

          Cluster::ClusterResource::bringOffline()

ClusterResource(SAP JEP IP, IP Address) is already offline.

TRACE      2015-03-18 11:30:38.319

ClusterIPAddress(SAP JEP IP).bringOffline() done

TRACE      2015-03-18 11:30:38.321 [syxxcnamrs.cpp:167]

          PSyHostsEntryInt CSyIPNameResolverImpl::getHostByName(const iastring& hostName) const

          lib=syslib module=syslib

IP name SAPJEP resolves to IP address(es): 10.100.2.36,

TRACE      2015-03-18 11:30:38.329 [clusterresource.cpp:700]

          Cluster::ClusterResource::setProperties()

::ClusterResourceControl(SAP JEP IP, CLUSCTL_RESOURCE_SET_PRIVATE_PROPERTIES) failed: The cluster IP address is already in use.

Error code 0x000013c1 (5057).

TRACE      2015-03-18 11:30:38.330 [jsextension.hpp:145]

          JSExceptionHandler::setJSException()

Member function 'ClusterResourceCpp.setProperties()' has thrown ESAPinstMsgException. Converting to JavaScript exception EJS::Exception.

TRACE      2015-03-18 11:30:38.331

Function setMessageIdOfExceptionMessage: osmod.cluster.ClusterResourceSetPropertiesFailed

ERROR      2015-03-18 11:30:38.331

          CJSlibModule::writeError_impl()

MOS-01325  Could not set properties on ClusterResource 'SAP JEP IP'.

TRACE      2015-03-18 11:30:38.332 [jsextension.hpp:1107]

          CallFunctionBase::call()

Member function 'Installer.invokeModuleCall() has thrown a module error. Rethrowing.

ERROR      2015-03-18 11:30:38.398 [csistepexecute.cpp:1158]

FCO-00011  The step assignNetworknameToClusterGroup with step key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|assignNetworknameToClusterGroup was executed with status ERROR ( Last error reported by the step: Could not set properties on ClusterResource 'SAP JEP IP'.).

TRACE      2015-03-18 11:30:38.459 [kdxxctaco.cpp:93]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile start ...

TRACE      2015-03-18 11:30:38.529 [kdxxctaco.cpp:121]

          CKdbTableContainerImpl::syncToContainerFile

after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml

TRACE      2015-03-18 11:30:38.719 [kdxxctaco.cpp:155]

          CKdbTableContainerImpl::syncToContainerFile

CKdbTableContainerImpl::syncToContainerFile stop ...

INFO      2015-03-18 11:30:38.737 [synxcpath.cpp:799]

          CSyPath::createFile() lib=syslib module=syslib

Creating file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\__instana_tmp.xml.

TRACE      2015-03-18 11:30:39.126 [cstatisticmanager.cpp:2226]

          CStatisticManager::writeInstallationSlanaFile_Intern

INFO      2015-03-18 11:30:39.142 [synxcpath.cpp:799]

          CSyPath::createFile() lib=syslib module=syslib

Creating file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\instslana.xml.

TRACE      2015-03-18 11:30:39.194

SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.

TRACE      2015-03-18 11:30:44.649 [iaxxgenimp.cpp:638]

            CGuiEngineImp::showMessageBox()

<html> <head> </head> <body> <p> An error occurred while processing option <i>SAP NetWeaver 7.4 Support Release 2 > SAP ASE > SAP Systems > Application Server Java > High-Availability System > First Cluster Node( Last error reported by the step: Could not set properties on ClusterResource 'SAP JEP IP'.)</i>. You can now: </p> <ul> <li> Choose <i>Retry</i><br>to repeat the current step. </li> <li> Choose <i>Log Files</i><br>to get more information about the error. </li> <li> Stop the option and continue later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1. </p> </body></html>

TRACE      2015-03-18 11:30:44.652 [iaxxgenimp.cpp:1031]

          CGuiEngineImp::acceptAnswerForBlockingRequest

Waiting for an answer from GUI

Please find the attached screenshot of error and the error log file of the installation.

Regards,

Arjun

Dear community,

In our company users usually print 2-15 lists, but there is oneunit, users whosemonthlyprintrunof 5,000sheets.At this point,other users can notprintanything. Please tell mehow tosolve this problem?Can bedividedthosewhoprinta large number ofsheetsandthosewhoprintless?

Hi All,

I'm configuring SAP GUI 7.4, I've done this by pulling entries from a server via the registry, there are also local entries that are being pulled from the usual Roaming\AppData\SAP\Common.. folder.

I want all of these entries to be listed under the connections folder when the GUI is launched, currently only the local entries are listed and a sub folder has been generated for the server entries.

Is anyone aware of how I can get the pulled server entries to appear under the connections folder?

Below are screenshots of my issue, any help would be appreciated!

Local entries within connections folder:

Server entries within generated subfolder (named Local by default):

Thanks!

Hi all,

I have a NW 7.00 system just migrating from Windows to Linux and in SM21 I'm seeing

"central system log cannot be read /usr/sap/<SID>/SYS/global/SLOGJ"

Now SM21 still has some messages in it AOK so it must have it's local log to read, but it has no additional application servers so I see no technical need for collection of other logs into a central log.

Any idea then if
a) this should be ignored

b) there is parameter setting somewhere so that it knows not even to look for a central log

c) if there is some other likely error here to fix

I've tried testing by creating this log - that works AOK using "touch" but still the error appears.

I've been through thread sm21 GIVING ERROR

and the notes posted there but no resolution is forthcoming - in fact the SAP notes mentioned (also below) are focused on collection of remote logs into a central log and so don't really apply to my scenario.

I'm hoping a new discussion may kick this on.

Cheers, Jamie

Hello,

I downloaded the Linux RFCSDK (RFC_linux_ia36_sdk.SAR, version info -> @(#)LIBRFC (c) SAP AG: Version: 640 Patch level: 0 Patch number: 129 thread-safe build 32 bit) onto my system today and am having trouble linking one of the sample programs (sapinfo.c).  (This is the only one I tried.)  Here are the first few error messages:

/opt/gcc-4.0.2/bin/gcc -I ../include -L ../lib sapinfo.c -o sapinfo -lrfc -lm -ldl

../lib/librfc.a(cpictlib.o)(.text+0x30cdb): In function `find_best_posix_clock':

: undefined reference to `clock_getcpuclockid'

../lib/librfc.a(cpictlib.o)(.text+0x30d5a): In function `find_best_posix_clock':

: undefined reference to `clock_gettime'

../lib/librfc.a(cpictlib.o)(.text+0x30dbe): In function `get_posix_nanoseconds':

: undefined reference to `clock_gettime'

../lib/librfc.a(cpictlib.o)(.text+0x4b467): In function `NiIInitSocket(int, SI_SOCK *)':

: undefined reference to `__throw'

../lib/librfc.a(cpictlib.o)(.text+0x4b471): In function `NiIInitSocket(int, SI_SOCK *)':

: undefined reference to `__start_cp_handler'

../lib/librfc.a(cpictlib.o)(.text+0x4b47e): In function `NiIInitSocket(int, SI_SOCK *)':

: undefined reference to `__check_eh_spec'

../lib/librfc.a(cpictlib.o)(.text+0x4b483): In function `NiIInitSocket(int, SI_SOCK *)':

: undefined reference to `__throw'

../lib/librfc.a(cpictlib.o)(.text+0x4b48c): In function `NiIInitSocket(int, SI_SOCK *)':

: undefined reference to `__cp_pop_exception'

../lib/librfc.a(cpictlib.o)(.text+0x4b498): In function `NiIInitSocket(int, SI_SOCK *)':

: undefined reference to `terminate(void)'

The linker eventually gives up with:

HSIMPL type_info function':

: undefined reference to `__rtti_user'

../lib/librfc.a(cpictlib.o)(.gnu.linkonce.t.__tf15NIHSIMPL_LINEAR+0x29): In function `NIHSIMPL_LINEAR type_info function':

: undefined reference to `__rtti_si'

../lib/librfc.a(cpictlib.o)(.gnu.linkonce.d.__vt_8NIHSIMPL+0x8): undefined reference to `__pure_virtual'

../lib/librfc.a(cpictlib.o)(.gnu.linkonce.d.__vt_8NIHSIMPL+0x10): undefined reference to `__pure_virtual'

../lib/librfc.a(cpictlib.o)(.gnu.linkonce.d.__vt_8NIHSIMPL+0x14): undefined reference to `__pure_virtual'

../lib/librfc.a(cpictlib.o)(.gnu.linkonce.d.__vt_8NIHSIMPL+0x18): undefined reference to `__pure_virtual'

../lib/librfc.a(cpictlib.o)(.gnu.linkonce.d.__vt_8NIHSIMPL+0x1c): undefined reference to `__pure_virtual'

../lib/librfc.a(cpictlib.o)(.gnu.linkonce.d.__vt_8NIHSIMPL+0x20): more undefined references to `__pure_virtual' follow

collect2: ld returned 1 exit status

I get the same issue if I try to compile with g++ or with version 3.4.5-2 of gcc/g++.  My system is:

Linux version 2.6.9-34.ELsmp (bhcompile@hs20-bc1-7.build.redhat.com) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 SMP Fri Feb 24 16:54:53 EST 2006

I appreciate any help on this matter.  Several hours of searching via Google or on the SDN did not turn up any useful clues.

Regards,

Mike Davis.

Hello Gurus,

We have upgraded MS SQL Database 2008 R2 to MS SQL Database 2012 ,After that we applied stack XML by using SUM tool,

Upgrade is done successfully,At SAP level in system status tab product version displying see details .

Please find the attachement and help us to resolve the issue.

Regards,

Yugandhar.

I am creating a two system landscape and when I release transport from DEV they are not showing up in the PRD queue.  Even when I add them manually they do not appear.  There are no error messages anywhere that I can find (/trans/log, SM21, etc.).  TMS checks  are all green.  In the target system, I can see the transports via SE10.   Any suggestions on what else to check? 

Hi All,

Since EHP 7, if I try to execute an external command through sm49, which has a shell script for ftp connection and fetching files, the 'binary' command after ftp connection is not working.

Result? I'm fetching corrupted files once in a while. The same was fine before the upgrade. The script runs fine at OS level. We are using AIX.

Did anyone see this issue before? Is there a solution?

Please help, it's quite urgent.

Thank you.

Uday

Hi Guys,

I just completed patching SAPJVM from 4.1.016 to  4.1.048 using the SUM tools. When I check the user environment, the environment is still points to 4.1.016. (I have login and re-login as sidadm)

echo $JAVA_HOME

/usr/sap/SID/SYS/exe/jvm/sunx86_64/sapjvm_4.1.016/sapjvm_4

java -version

java version "1.4.2_32"

Java(TM) 2 Runtime Environment, Standard Edition (build 4.1.016)

SAP Java Server VM (build 4.1.016 19.1-b02, Jan  2 2012 22:15:46 - 41_REL - optU - solaris amd64 - 6 - bas2:164914 (mixed mode))

more summanifest.mf

Manifest-Version: 1.0

keyname: SUM

keyvendor: sap.com

keylocation: SAP AG

os: sunx86_64

compilation mode: UNICODE

compiled for: 64 BIT

release: 1.0

support package: 12

patch number: 3

native branch: lmt_008

java branch: lmtj_008_REL

assembly time: 2015-01-08 05:30:37

pack version: 28

pack tool version: 1.044

Q: Do I need to change the user environment manually? A bit weird as when I did a JVM switch, the user environment change automatically.

Hy

i'm installing a database instance on oracle 11.2.0.4.5 RAC on ASM with GRID.

We have two nodes . Grid is installed each node in local while oracle 11204 is shared .

Both database are patched with last bundle and grid patches .

During the sapinst installation we have the following problem when it asked us the database grid software parameters:

after inserting the right oracle home it goes in error:

Database Instance( Last error reported by the step: Assertion failed: OraQuery3 constructor: Argument context has to be a valid OraSqlContext.)

Analyzing the sapinst_dev.log i think to have found the probably error :

******************

NWUsers.getAccountData(): {

  role:ORACLE

  type:USER

  systems:os

  id:

  name:oracle

  comment:Oracle System Administrator

  home:/oracle/ORAGRID

  shell:/bin/csh

  privileges:

  exists:false

  client:

  host:undefined

  instancenumber:undefined

  locked:false

  chownHomeDir:true

  password:XXXXXX

  groups:oinstall,sapinst,dba,oper,asmoper,asmdba,asmadmin

}

TRACE      2015-03-27 14:53:06.705

OraCom(selectASMDiskGroup() start: false

TRACE      2015-03-27 14:53:06.705

T_ORAASMDG.remove(WHERE 1=1)

ERROR      2015-03-27 14:53:06.705 [CInstallerCallBackImpl.cpp:228]

CJS-00030  Assertion failed: OraQuery3 constructor: Argument context has to be a valid OraSqlContext.

TRACE      2015-03-27 14:53:06.705 [JSExtension.hpp:145]

           JSExceptionHandler::setJSException()

Member function 'Installer.abortInstallation()' has thrown ESAPinstException. Converting to JavaScript exception EJS::Exception.

*********************

i think the problem is the following:

Grid and DB were installed with user oragrid and not with oracle user.

Anyway it should create that user or not...Do you think is this the problem? Is it some workaround to solve this problem?

Thanks

Nick

Hello everyone.

I'm have problem with job "SM:EXEC SERVICES" in my System: SolutionManager 7.1 SPS12.

...

Number of sessions to process in parallel: 5

Child job SM:EXEC_MULT_SES_1 started

Displaying log of child job SM:EXEC_MULT_SES_1

 

 

Step 001 started (program AGS_SISE_SM_EXEC_PARALL_REPORT, variant &0000000000060, user ID SOLMAN_BTC)

Trying to perform session EA0010000000001

Error (shown below) in session EA0010000000001. Hints on analysis in SAP Note 700518

Error message: An exception occurred that was not caught.

Session EA0010000000001 not performed

Step 002 started (program AGS_SISE_SM_EXEC_PARALL_REPORT, variant &0000000000061, user ID SOLMAN_BTC)

Trying to perform session VE0010000000002

Error (shown below) in session VE0010000000002. Hints on analysis in SAP Note 700518

Error message: An exception occurred that was not caught.

Session VE0010000000002 not performed

...

ABAP DUMP "Error analysis":

An exception occurred which is explained in detail below.

The exception, which is assigned to class 'CX_DSVAS_API_SERVICE_SESSION', was

not caught and

therefore caused a runtime error.

The reason for the exception is:

Program for actions in check group &EW_ROOT& version &50079& not found

 

 

The occurrence of the exception is closely related to the occurrence of

a previous exception "CX_SY_PROGRAM_NOT_FOUND", which was raised in the program

"CL_DSVAS_PROC_CHECK_GROUP=====CP",

specifically in line 25 of the (include) program

"CL_DSVAS_PROC_CHECK_GROUP=====CM00A".

The cause of the exception was:

 

 

Program /1AGS/AEW_ROOT_____________079 does not exist

  An exception occurred which is explained in detail below.

  The exception, which is assigned to class 'CX_DSVAS_API_SERVICE_SESSION', was

   not caught and

  therefore caused a runtime error.

  The reason for the exception is:

  Program for actions in check group &EWAFS_ROOT& version &50007& not found

 

 

  The occurrence of the exception is closely related to the occurrence of

  a previous exception "CX_SY_PROGRAM_NOT_FOUND", which was raised in the program

   "CL_DSVAS_PROC_CHECK_GROUP=====CP",

  specifically in line 25 of the (include) program

   "CL_DSVAS_PROC_CHECK_GROUP=====CM00A".

  The cause of the exception was:

 

 

  Program /1AGS/AEWAFS_ROOT__________007 does not exist

i'm was trying find program "/1AGS/AEWAFS_ROOT__________007" and "/1AGS/AEW_ROOT_____________079" in SE80, but to no avail.

Full job report and dumps in attachment.

Kernel release    721

Compilation       Linux GNU SLES-11

Sup.Pkg lvl.      401

ABAP Load         1780

CUA load          39

Mode              opt